S T E R E O A M P L I F I E R / A U T O M A T E D S W I T C H E R
3.Gradually turn the sensitivity adjustment screw located on the bottom of the TVA50 (Figure 6) until you hear the inter- nal relay of TVA50 switch. This is indicated by a clicking sound inside the unit. The Power/Active LED on the front panel of the TVA50 (Figure 7) provides a visual indication of the local switching. When the TVA50 switches to the local input the Power/Active LED will change from red to green.
4.Cycle the power of the local source component on and off. Adjust the sensitivity setting of the TVA50 until the internal relay switches reliably.
NOTE: The TVA50 may be set to operate continuously by turning the sensitivity screw fully counterclockwise. This will bypass the internal sensing mechanism.
Figure 7:
TVA50 Power/Active LED
14