S T E R E O A M P L I F I E R / A U T O M A T E D S W I T C H E R
Installation
Caution: Turn the power OFF to all components in the system to prevent accidental shorting or electrical shock.
Mounting the TVA50
When possible, the TVA50 should be installed near the device to be switched. An unswitched 120VAC outlet is required to power the TVA50. (Unit should remain unplugged during installation.) Care should be taken to provide adequate space for access and connections.
Horizontal (Shelf) Mount.
Install the supplied self adhesive rubber feet to the bottom of the TVA50. The unit can be placed on top of a shelf in a wall unit or equipment cabinet. Nothing should be placed on top of the unit.
Vertical (Wall) Mounting.
The unit can also be attached to the side wall or back panel of a wall unit or equipment cabinet using the keyholes on the back of the TVA50.
1.Using a level and tape measure, install four drywall screws according to the measurements shown in Figure 6.
2.Align the keyholes on the back of the TVA50 with the mounting screws and slide the unit down until it locks.
15