ELECTRICAL INSTALLATION
REMOTE WALL MOUNTED SWITCH | WARNING | |
A remote wall switch and up to fifteen (15) feet of 18 | ||
|
gauge wire may be used with this appliance. Attach the wall switch in a junction box at the desired location on the length provided.
Do not connect 110V to wall switch.
wall. See Figure 42. Do not extend beyond the wall switch wire
NOTE: Extended lengths of wire may cause the fireplace not to function properly. Longer length of wire is permitted if the wire is made out of larger gauge (diameter) wire. Always check with local code.
OPTIONAL WALL
SWITCH
ON 
OFF 
RS OFF ON
WHITE | BLUE | BLACK |
|
| |
| PILOT | HI |
OFF | ON | TH |
|
| |
|
| TP |
|
| TH/TP |
GRAY
BLUE
BLACK
OPTIONAL REMOTE
RECEIVER
ON
RS
OFF
BLACK
Figure 42 - Wiring Diagram for Wall Switch
REMOTE WALL SWITCH
Position the wall switch. Do not extend beyond the 15 feet of wire.
OPTIONAL DC REMOTE SYSTEMS
These instructions replace the section entitled Hearth Mount in the Millivolt hand held remote instructions supplied with the remote.
1.Plug in remote connector wire to remote receiver.
2.Connect the wire terminal from the remote receiver. This replaces the 15' wall switch connection to the switch. See Figure 42.
3.Mount remote control receiver at junction box (for your wall switch).
OPTIONAL FAN/BLOWER SYSTEMS
The junction box for the fan/blower systems has been factory installed. This system requires that
|
| BLACK |
|
| GREEN |
BLACK BLACK | WHITE TAN | TAN |
SPEED CONTROL |
| |
| OPTIONAL THERMOSTATIC SWITCH | |
Figure 43 - Blower Wiring Diagram
54D5031 | 31 |
