PRE-INSTALLATION INFORMATION
HIGH ELEVATIONS
Input ratings are showin in BTU per hour adn are certified without deration for elevations up to 4,500 feet (1,370m) above sea level.
For elevations above 4,500 feet (1,370m) in USA, installations must be in accordance with the current ANSI Z223.1/NFPA 54 and/or local codes having jurisdiction.
In Canada, please consult provincial and/or local authorities having jurisdiction for installations at elevations above 4,500 fee (1,370m).
ORIFICE SIZES, PRESSURES AND BTUs
NATURAL GAS |
|
| PROPANE GAS |
|
| |||
Manifold Press: (W.C.) | 3.5" | Manifold Press: (W.C.) |
| 10" | ||||
Maximum Supply Pressure | 10.5" | Maximum Supply Pressure | 13" | |||||
Minimum Supply Pressure | 4.5" | Minimum Supply Pressure | 11" | |||||
|
|
|
|
|
|
|
|
|
| Model Number |
|
| HBDV300 | HBDV400 |
| ||
|
|
|
| Natural | Propane | Natural | Propane | |
|
|
|
|
|
|
|
| |
| Max. Btu/hr Input |
|
| 23,000 | 23,000 | 27,000 | 26,000 | |
|
|
|
|
|
|
|
| |
| Min. Btu/hr Input |
|
| 16,000 | 18,000 | 19,000 | 20,000 | |
|
|
|
|
|
|
|
| |
| Orifice size |
| 2.35mm | 1.50mm | #41 | 1/16 |
| |
|
|
|
|
|
|
|
|
|
BEFORE YOU START
Read this homeowner manual thoroughly and follow all instructions carefully. Inspect all contents for shipping damage and immediately inform your dealer if any damage is found. Do not install any unit with damaged, incomplete, or substitute parts. Check your packing list to verify that all listed parts have been received. You should have the following:
•Fireplace (Firebox and Burner System)
•Rock Wool
•Log Set
ITEMS REQUIRED FOR INSTALLATION
Tools: | Building Supplies: | ||
• | Phillips Screwdriver | • | Framing Materials |
• | Hammer | • | Wall Finishing Materials |
• Saw and/or saber saw | • | Caulking Material (Noncombustible) | |
• | Level | • Fireplace Surround Material (Noncombustible) | |
• | Measuring Tape | • Piping Complying with Local Codes | |
• Electric Drill and Bits | • | Tee Joint | |
• | Pliers | • Pipe Sealant Approved for use with Propane/LPG | |
• | Square |
| (Resistant to Sulfur Compounds) |
• | Pipe Wrench |
|
|
6 | 54D5031 |
