Monessen Hearth HBDV400, HBDV300 manual Glass Removal & Brick Installation, Glass Frame Removal

GLASS REMOVAL & BRICK INSTALLATION

GLASS FRAME REMOVAL

1.Release two clamps on bottom of fireplace. See Figure 44.

2.Tilt glass frame out and lift glass frame up until it clears three tabs on top of fireplace.

3. Set glass frame aside.

Glass Frame

Clamps

Figure 44 - Removing Glass Frame

CAUTION: Each clamp has a quick spring force. When reinstalling clamps, keep fingers clear.

BRICK INSTALLATION

1.Remove glass door frame and log set.

2.Remove the glass heat shield, baffle and rear bracket.

3.Install the center firebrick panel on the back wall first. Stand firebrick panel straight up against the back of fireplace with the bottom edge at bottom of inner firebox.

4.Repeat Step 3 with the left and right side firebrick panels. Secure the top of each side firebrick panel to the fireplace with one retainer bracket and one screw.

5.Use a screw gun to drive in the self-drilling screw into the sheet metal through the hole in the retainer bracket.

6.Re-install glass heat shield, baffle and rear bracket.

7.Re-install glass door frame and log set.

32 54D5031