Honeywell AC-140-7, AC-220-7 manual Emissions Compliance, Immunity Compliance, Safety Compliance

Page 43

SPECIFICATIONS

T775A/B/M SERIES 2000 CONTROLLER

SPECIFICATIONSDoC

Power: 24, 120, or 240 Vac; 50/60 Hz;

A separate earth ground is required for any power source.

Power Consumption:

•8 VA maximum at 60 Hz

•10 VA maximum at 50 Hz

Operating & Storage Temperature Ambient Rating:

•-40°F to 125°F (-40°C to 52°C) @ 50 Hz

•-40°F to 140°F (-40°C to 60°C) @ 60 Hz

Relative Humidity: 5% to 95% non-condensing

Relay Contact Output Ratings (N.O. and N.C.):

•1/2 hp; 9.8 AFL, 58.8 ALR @ 120 Vac

•1/2 hp; 4.9 AFL, 29.4 ALR @ 240 Vac

•125 VA pilot duty @ 120/240 Vac

•10A @ 24 Vac (resistive)

Modulating Outputs:

•0-10 Vdc; drive a minimum of 2,000 Ohms

•2-10 Vdc; drive a minimum of 2,000 Ohms

•4-20 mA; drive a maximum of 600 Ohms

•Electronic Series 90

•Floating

Emissions Compliance

EN 55022: 2006

CISPR 22: 2006

VCCI V-3/2006.04

ICES-003, Issue 4: 2004

FCC PART 15 SUBPART B Class B Limit

Immunity Compliance

EN 61000-6-1: 2001 covering

EN 61000-4-2: 1995 + A1: 1998 + A2: 2001

EN 61000-4-3: 2002

EN 61000-4-4: 2004

EN 61000-4-5: 1995 + A1: 2001

EN 61000-4-6: 1996 + A1: 2001

EN 61000-4-8: 1993 + A1: 2001

EN 61000-4-11 2nd Ed.: 2004

Safety Compliance

UL 60730-1 and Part 2-9 for US and Canada

FCC Compliance Statement:

This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television equipment reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna

—Move the equipment away from the receiver

—Plug the equipment into an outlet on a circuit different from that to which the receiver is connected

—Consult the dealer or an experienced radio/television technician for additional suggestions

You are cautioned that any change or modifications to the equipment not expressly approve by the party responsible for compliance could void Your authority to operate such equipment.

This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation.

35

62-0254–03

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Section Introduction FP-4 Freeze Protection KITSection InstallationInstalling the Conduit Control BOX Component Layout and Wiring Diagram Section InstallationOperation Setting the ControllerTroubleshooting Procedures Section TroubleshootingReplacement Parts Section Replacement PartsPER VAN AIR Terms and Conditions of Sale Section WarrantyProduct Description Controller Dimensions Temperature SensorsaAccessories Mounting Before InstallationInstallation and Setup WiringMultiple Parallel Sensors Wiring Connections AccessTemperature Sensor Wiring Temperature Sensor Wire Type and SizeController Wiring Method Controller WiringConnection Terminal Label Description Sensors Wiring Applications ExamplesController Wiring Details Description of Wiring Terminal Connections Terminal LabelWiring for four-stage control 24 Vac input 24 Vac load Wiring for ML7984 valve actuator Wiring for three Series 90 Modutrol Motors Foota MΩ/ft Rating 200 ft 500 ft 000 ft Power LossTemperature Sensor Calibration CheckoutInterface Overview Using the LCD Panel InterfaceHome Screen Programming, Scheduling, and Summary Menus Accessing the MenusUsing the Menus Setup MenuSetpoint and Differential Heating Mode Setpoint and DifferentialCooling Mode Setpoint and Differential ProgrammingProgramming the T775A/B/M Controller Entering Program ModeProgram Menu for Outputs Sensor Differential or Throttling RangeHEAT/COOL Setback Exiting Program ModeProgram Next Output Mod or Relay Setting up the Sensors Setup Advanced OptionsSetup Procedure Entering Setup ModeLabel the sensor input Sensor aUnits F or C Calibrate the sensorLabel Exit Sensor a SetupSensor B CalibrateLimit Sensor B only HI Limit or LOW Limit Sensor B onlySetting up the Modulating Outputs Setting up the OutputsThrottling Range Sensor B only MIN OUT % Type of output signalIntegral Exit ScheduleUSE Sched OptionsDI Options digital input options MIN OFF minimum off time for all relaysShow RT show run time hours Setting up the Relays Exit Options SetupType standard or floating Floating Relay Menu Derivative modulating/floating relay only Reset RT run time hoursSetup Outputs Relay Exit Exit Setup ModeScheduling Entering Schedule ModeCreating a Schedule SET Date SET TimeDaylight daylight saving time Mon-Fri Schedule Defaults Setting Individual Schedules1. E1 Setpt setpoint for event 3. E2 Setpoint setpoint for event Exiting Scheduling ModeExit exit from selected time period settings 2. E1 Time time for eventDiagnostic Messages TroubleshootingErrors and Diagnostics Error MessageFCC Compliance Statement Safety ComplianceEmissions Compliance Immunity ComplianceDOC T775A/B/M Series 2000 Controller

AC-220-7, AC-140-7 specifications

The Honeywell AC-140-7 and AC-220-7 are advanced air conditioning units that exemplify modern air conditioning technology, delivering both comfort and efficiency. Designed for varying space requirements, these units cater to both residential and light commercial settings, providing versatile solutions for climate control.

The AC-140-7 model is particularly known for its compact design, making it suitable for smaller spaces without sacrificing performance. It delivers an impressive cooling output, effectively maintaining comfortable indoor temperatures even during the hottest months. The system utilizes a high-efficiency compressor that operates quietly, ensuring minimal disruption to daily activities. Additionally, the AC-140-7 features an advanced air filtration system that helps to improve indoor air quality by capturing dust, allergens, and other particulates.

In contrast, the AC-220-7 is designed for larger spaces, providing robust cooling capacity. It incorporates multiple fan speeds and advanced thermostatic controls, allowing users to customize their cooling experience according to their preferences and requirements. One of the standout characteristics of the AC-220-7 is its energy efficiency, with a high Seasonal Energy Efficiency Ratio (SEER) rating, which is crucial for reducing energy costs while maintaining optimal performance.

Both models are equipped with state-of-the-art technologies, including smart diagnostic features that help users troubleshoot issues quickly and efficiently. This capability not only enhances the user experience but also prolongs the lifespan of the units. Furthermore, these units are easy to install and maintain, with accessible components for service and cleaning.

A critical characteristic of the Honeywell AC-140-7 and AC-220-7 is their environmentally friendly refrigerants, which align with modern environmental regulations. This aspect makes them a responsible choice for environmentally conscious consumers.

In summary, the Honeywell AC-140-7 and AC-220-7 units are excellent examples of innovation in air conditioning solutions. With their combination of efficiency, advanced features, and quiet operation, these models represent a significant investment in comfort and sustainability for any space. Whether cooling a small room or a larger area, Honeywell’s engineering excellence ensures that users enjoy effective climate control tailored to their needs.
Top Page Image Contents