TX9100E
SMART TEMP® UNIVERSAL PROGRAMMABLE THERMOSTAT
FOR BOTH CONVENTIONAL AND HEAT PUMP SYSTEMS | 52032 |
INSTALLATION AND OPERATING INSTRUCTIONS
IMPORTANT!
•Please read all instructions carefully before beginning installation
•Label the terminal designations on your existing wiring before removing your existing thermostat
•Ignore the color of the wires since they may not comply with any standard.
Thank you for your confidence in our product. To obtain the best results from your investment, please read these instructions and acquaint yourself with your purchase. Follow the installation procedures carefully, and one step at a time. This will save you time and minimize the chance of damaging either the thermostat or the systems that it controls. These instructions may contain information beyond that required for your particular installation.
1. | SYSTEM COMPATIBILITY | . 2 | 9. | COMPLETE THE INSTALL | 18 |
2. | FEATURES | . 3 | 10. | FRONT PANEL ITEMS | 19 |
3. | TOOLS REQUIRED | . 3 | 11. | OPERATING INSTRUCTIONS | 20 |
4. | SELECTING A LOCATION | . 4 | 12. | ADVANCED FEATURES | 24 |
5. | REMOVE OLD THERMOSTAT | . 5 | 13. | PROGRAMMING | 29 |
6. | MOUNT NEW THERMOSTAT | . 5 | 14. | BATTERIES AND MAINTENANCE . . . | 30 |
7. | WIRING DIAGRAMS | . 6 | 15. | TECHNICAL ASSISTANCE | 31 |
8. | HARDWARE SETUP OPTIONS . . . . | 16 | 16. | WARRANTY | 31 |
WARNING: Use Energizer® or DURACELL® Alkaline Batteries Only.
Energizer® is a registered trademark of Eveready Battery Company, Inc.
DURACELL® is a registered trademark of The Gillette Company, Inc.
© 2008 LUX PRODUCTS CORPORATION. ALL RIGHTS RESERVED