Bryant SYSTXBBUIZ01 instruction manual Thin Decorative Backplate

Page 3

A04017

Fig. 5—Thin Decorative Backplate

Fig. 2—Evolution Zone Control

A03185

Recessed terminal block in wall 11/2˝ wide by 2 1/8˝ high

Recessed Mount

Interlocking Tabs (4)

A03190

Fig. 6—Recessed Mount Assembly

A03186

Fig. 3—Recessed Mount Backplate

A03187

Fig. 4—Surface Mount Backplate

C. Step 3 — Installing Evolution Zone Control™

WARNING: ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death.

Before installing Evolution Zone Control™, turn off all power to equipment. There may be more than one power source to disconnect.

1.Turn off all power to equipment.

2.If an existing User Interface or control is being replaced:

a.Remove existing control from wall.

b.Disconnect wires from existing control.

—3—

Surface Mount

Backplate to wall

Interlocking Tabs (4)

A03191

Fig. 7—Surface Mount Assembly c. Discard or recycle old control.

NOTE: Mercury is a hazardous waste, if existing control contains any mercury, it MUST be disposed of properly.

3.Select Evolution Zone Control™ mounting plastic (recess mount or surface mount and decorative backplate if de- sired).

4.Route wires through large hole in mounting plastic. Level rear plastic against wall (for aesthetic value only - Evolution Zone Control™ need not be level to operate properly) and mark wall through two mounting holes.

5.Drill two 3/16 inch mounting holes in wall where marked.

6.Secure mounting plastic to wall using two screws and anchors provided.

7.Adjust length and routing of each wire to reach each wire entry on the connector backplate. Strip ¼ inch of insulation from each wire.

Image 3
Contents Installation Table of ContentsSafety Considerations Installation and START-UP OverviewEvolution Zone Control Location and Wiring Considerations Thin Decorative Backplate Large Decorative Backplate Equipment Wiring DiagramsInitial POWER-UP Power Up SequenceSelecting Outdoor Unit Filter Selection Selecting AccessoriesSelecting Electric Heater Equipment SummaryQuick Start Install / Service MenusInstall Menu Setup MenuEquipment Summary Menu Setup = Accessories Setup = FAN CoilSetup = Heat Pump / AC Setup = ZoningCheckout Menus Service = Heat Pump / AC Status Service MenusService = Furnace Status Service = FAN Coil StatusOperational Information Troubleshooting Page

SYSTXBBUIZ01 specifications

The Bryant SYSTXBBUIZ01 is a versatile and innovative thermostat designed to optimize the performance and efficiency of heating, ventilation, and air conditioning (HVAC) systems. As part of Bryant's commitment to providing reliable climate control solutions, this unit integrates advanced technologies for seamless user experience and enhanced energy savings.

One of the most notable features of the SYSTXBBUIZ01 is its intuitive interface, which includes a large, user-friendly touchscreen display. This feature makes it easy for homeowners to monitor and adjust their indoor climate with just a few taps. The thermostat supports both heating and cooling modes, allowing users to create customized schedules that fit their lifestyle and maximize comfort throughout the year.

The SYSTXBBUIZ01 utilizes smart technology to provide homeowners with remote access through a mobile application. This capability allows users to adjust their home’s temperature settings from anywhere, ensuring that they can maintain optimal comfort even when away from home. The application also provides energy usage reports, empowering users to make informed decisions about their energy consumption.

In terms of connectivity, the SYSTXBBUIZ01 is equipped with Wi-Fi capability, enabling easy integration with existing smart home systems. This feature allows for voice command controls via compatible virtual assistants, adding an extra layer of convenience to everyday operations.

The thermostat is designed to be compatible with a variety of HVAC systems, including single-stage and multi-stage systems, ensuring broad applicability in many homes. Additionally, the device includes advanced sensors that monitor temperature and humidity levels to provide precise climate control, further enhancing energy efficiency and comfort.

Energy-saving features are a significant highlight of the SYSTXBBUIZ01. The thermostat is equipped with adaptive recovery technology, which learns the heating and cooling patterns of the home, allowing it to optimize operation schedules for maximum efficiency. Additionally, it includes features like geofencing, which adjusts the temperature based on the homeowner’s location, further promoting energy conservation.

The Bryant SYSTXBBUIZ01 stands out as a resilient and effective solution for modern home climate control, combining user-friendly design, smart functionalities, and energy-saving technologies. Its advanced features make it an ideal choice for anyone looking to enhance their home’s comfort and efficiency.