Aprilaire 8570 Input Dealer Contact Information, To delete a character, press the Back button

5. INPUT DEALER CONTACT INFORMATION

During thermostat operation, the two multi-function buttons are labeled INFO and MENU. When the INFO button is pressed, the thermostat will display the humidity and temperature sensed by the AHC (if an AHC has not been installed the Aprilaire logo screen will appear), then the thermostat will display the thermostat model number and contact information. At installation, the contact information is blank and only the thermostat model number appears. You have the option of inputting this contact information with the name and number of your company. Twenty (20) characters are available for your company name. Space for a telephone number, including area code, is available.

To change the contact information:

1.Make sure the thermostat is in the OFF mode.

2.Press and hold both the ▲ and ▼ buttons for 3 seconds.

– The display will show the ADV. SETTINGS MENU.

3.Use the ▲ or ▼ button to highlight “INPUT DEALER INFO” and press the SELECT button. This enters the company name screen.

4.To cancel, press the BACK button. This returns to the ADV. SETTINGS MENU. You must be at the first position when pressing the BACK button to return to the

ADV. SETTINGS MENU.

5.To delete a character, press the BACK button.

6.To enter a letter in the name of the company, use the

▲or ▼ buttons to scroll through the available characters. Press the SELECT button to enter the character. For spaces, press SELECT.

7.To finish and go to the company number screen, repeatedly press SELECT until all remaining characters have been filled with spaces, then press SELECT again.

8.To delete a number, press the BACK button.

9.To enter a number, use the ▲ or ▼ buttons to scroll between the available characters. Press the SELECT button to enter the character. The full 10-digit telephone number must be entered.

10.To finish, press the SELECT button after entering the 10th digit.

- 33 -