Decorative Wireless Chime
6180 Series and 6280 Series
This package includes (Style of push button and chime may vary from illus- trations):
¥Wireless chime
¥Wireless push button w/battery
¥Hardware pack
You'll need to buy 3 "D" alkaline batteries for the chime (Clock chime models require additional "AA" battery). In typical use, alkaline batteries will last up to three years.
1. Install alkaline type A23 12 volt push button bat- tery. Remove back of case by pushing in tab on bottom with a small screwdriver. Make sure battery is oriented properly (see page 4).
| Chime |
|
| |
| Volume |
|
| |
Cover |
| Jumpers | ||
Mounting |
| |||
- | + | - | ||
Tabs | ||||
| Battery | Battery | Battery | |
| + | - | + | |
|
|
|
Case Style "A" (Shown
In Vertical Position)
Chime
Volume
Jumpers
2.Install 3 alkaline "D" batter- ies. Make sure batteries are oriented properly.
The base may be mounted in a vertical or horizontal position. The correct mounting position will depend upon the specific cover (model).
3.Test range. Temporarily posi- tion chime and push button where you want them mounted. Press push button to verify chime and push button work properly. If chime does not sound, see Troubleshooting.
Case Style "B"
© 2003 DESA Specialty Productsª |