4.Mount push button and chime.
Keyholes
211Ú16 "
Holes | 21 | |
/2 | ||
| ||
| " |
Case Style "A"
Back
Use either screws or double sided tape to mount push button.
To mount with screws, remove back of case by pushing in tab on bottom with a small screwdriver.
Attach back of case to door jamb or wall. Snap front of push button on.
When attaching push button using double sided tape, make sure the surface of the door jamb or wall is clean.
Case Style "A": Chime can be mounted by us- ing 3 holes in the back of case, or by using 2 screws with keyholes.
Case Style "B": Chime can be mounted by us- ing 1 large screw (provided) with
5.Slide chime cover onto top of chime. Use technique for the style case you have. Mounting groove in cover will align with mounting tab(s) on base.