Troubleshooting
Chime does not sound:
¥Make sure the doorbell button and the chime codes are the same (See page 3).
¥Check orientation of doorbell button battery (See page 3).
¥Check the doorbell button and chime batteries, replace if necessary.
Batteries seem OK, but the chime does not work when installed:
¥Do not mount the chime or doorbell button on metal or near metal studs. This reduces the transmitter range. Use 1/4" to 1/2" (6 to 13 mm) wood shims to move the chime or doorbell button off the metal surface.
¥Do not mount the chime too close to ground level concrete slabs. This may also reduce the range. Mount the chime away from the floor.
¥Try different locations for the chime closer to the doorbell button. Also try to orient the chime at a different angle to increase the range.
The range of the doorbell depends on location, temperature and battery condition.
Regulatory Information
This device
(2)this device must accept any interference received, including interference that may cause undesired operation.
The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the userÕs au- thority to operate the equipment.
Technical Service
(Do Not Send Products)
If you experience a problem, follow this guide. You may also want to visit our Web site at: www.desatech.com. If the problem persists, call* for assistance at
DESA Specialty Productsª
P.O. Box 90004, Bowling Green, KY
*If contacting Technical Service, please have the following information avail- able: Model Number, Date of Purchase, and Place of Purchase.