Shark EP621 owner manual Limpieza del filtro Hepa y el filtro de malla, Instalación DE LA Manguera

Page 17

INSTRUCCIONES PARA OPERAR

INSTRUCCIONES PARA OPERAR

Limpieza del filtro HEPA y el filtro de malla

ADVERTENCIA: Después de

cada uso, siempre saque los filtros y sacuda vigorosamente el filtro HEPA y el filtro de malla hasta que deje de salir polvo.

IMPORTANTE: Tome nota de que el filtro HEPA “Tap Clean” para polvo detendrá la mayoría de partículas más finas de polvo y alérgenos suspendidos en el aire evitando que regresen al aire que usted respira. De hecho, retiene el 90.97% de partículas pequeñas hasta de 0.3 micrones, ¡Muchas veces más finas que un cabello humano!!! Debido a esta increíble capacidad filtrante, los pliegues blancos del filtro HEPA se obturarán rápidamente con muchas partículas finas de polvo que son difíciles de ver y que, si no se limpian adecuadamente, reducirán la capacidad de succión.

1.Para sacar el conjunto de filtros, sostenga el contenedor con una mano mientras que con la otra gira la tapa contra el sentido del reloj y la saca. (Fig. 14)

3.Quite el anillo que está alrededor del filtro HEPA. Después de sacar el filtro HEPA del filtro de malla, cacuda vigorosamente el filtro HEPA contra una superficie dura hasta que deje de salir polvo.

4.Para limpiar la suciedad acumulada en el filtro de malla se recomienda enjuagarlo bajo el chorro de la llave de agua tibia y dejarlo secar por 24 horas antes de reinstalarlo en la aspiradora.

5.Para reensamblar el conjunto de filtros, inserte el filtro HEPA en el filtro de malla, luego inserte el conjunto en la tapa; pero espere a que el filtro de malla se seque completamente antes de reinstalarlo en el contenedor.

NOTA: El material plegado del filtro HEPA se decolorará con el tiempo. Esto es NORMAL y NO afectará el rendimiento del filtro. Si el filtro HEPA se limpia apropiadamente sacudiéndose

ADVERTENCIA: Siempre desenchufe del tomacorriente antes de ensamblar o sacar accesorios de la aspiradora.

INSTALACIÓN DEL MANGO EN EL

Fig. 2

CUERPO PRINCIPAL DE LA UNIDAD

 

• Inserte el mango en el orificio encima de la

 

unidad asegurándose que la ranura en el

 

mango entre correctamente en la abertura.

 

(Fig. 1).

 

• Para sacar el mango, presione el botón

 

del seguro y tire del mango hacia arriba.

 

 

Seguro para

 

escobilla

 

para pisos

 

Conector de la

 

escobilla para

 

pisos

INSTALACIÓN DE LA MANGUERA

• Agarre el extremo del mango desmontable de la manguera e insértelo en el conector de la manguera (Fig. 3).

Fig. 1

Fig. 14

2.Para separar los filtros, agarre el filtro de malla de la parte de abajo y tire hacia afuera. Luego saque el filtro HEPA del filtro de malla.

(Fig. 15)

Conjunto de filtros

Tapa del filtro

Filtro

 

HEPA

 

Anillo del

 

Filtro

 

Filtro de

Fig. 15

malla

 

después de cada

 

uso y la fuerza

Fig. A

de succión no

Lavar una

vez al mes

se restituye al

o cuando

100%; sugerimos

parezca

que la

limpiarlo

fuerza de

sacudiéndolo

succión ha

reducido.

vigorosamente

 

hasta que deje

Advertencia: Espere 24

de salir polvo,

horas para que seque antes

luego enjuagarlo

de reinstalar en la unidad.

bajo el chorro de

 

agua tibia de la llave y que se deje secar por 24 horas antes de reinstalarlo en la

aspiradora. (Fig. A) Esto debe hacerse una vez al mes o cuando parezca que la fuerza de succión ha disminuido.

INSTALACIÓN DE LA ESCOBILLA PARA PISOS

Inserte la escobilla en su conector en la base de la unidad observando la dirección de la flecha (Fig. 2).

Cerciórese que la escobilla quede bien insertada en el conector de la base.

Inserte la manguera conectora en el casco de la escobilla para pisos (Fig. 3).

Para sacar la escobilla de la aspiradora, oprima el botón del seguro y tire de la escobilla hacia fuera.

Conector de mangueras

Fig. 3

Manguera conectora

Conector a

escobilla

para pisos

18

15

Image 17 Shark EP621 Limpieza del filtro Hepa y el filtro de malla, Instalación DEL Mango EN EL Cuerpo Principal DE LA Unidad
Contents USA EURO-PRO Operating LLC Canada EURO-PRO Operating LLC Modèle EP621 Garantie Limitée DE UN 1 ANRemarque Guide DE DépannagePour le modèle EP621 Thermostat du moteur Changement de la courroieAvertissement Avertissement Videz toujours la coupelle et nettoyez Directives D’USAGE Precautionary MeasuresChangement et nettoyage du filtre d’échappement Nettoyage de l’anneau de filtreInserting the Handle Into the Main Unit Operating Instructions Directives D’USAGEAttaching the Floor Brush to the Main Unit Attaching the Hose to the Main UnitON/OFF Switch Winding & Unwinding the Power CordUsing the Unit with the Accessories Directives D’USAGE Operating InstructionsCommande Manuelle DE Succion Variable Usage DE L’ASPIRATEUR Avec AccessoiresEnroulement ET Déroulement DU Cordon CommutateurFilter Assembly Cleaning the Hepa Filter and the Debris ScreenInsertion DE LA Poignée Dans LE Corps DE L’ASPIRATEUR Fixation DU Boyau AU Corps DE L’ASPIRATEUROperating Instructions Mesures DE Précaution Changing & Cleaning the Exhaust FilterCleaning the Filter Ring Motor Thermostat Changing the BeltOrdering Replacement Hepa Dust CUP Filters Trouble Shooting GuideFor Model EP621 Please NoteOwnership Registration Card Garantía Limitada DE UN 1 AÑONota Importante Guía DE Diagnóstico DE ProblemasPara Ordenar Filtros Para EL Modelo EP621 Liviana Para Trabajo Pesado Instrucciones Para Operar Familiarización CON LA ApsiradoraCambio de la correa Advertencia Siempre Termostato del MotorLimpieza del anillo del filtro Medidas DE Precaución Instrucciones Para OperarCambio y limpieza del filtro de escape Instalación DEL Mango EN EL Cuerpo Principal DE LA Unidad Limpieza del filtro Hepa y el filtro de mallaInstalación DE LA Manguera Instalación DE LA Escobilla Para PisosSensor Intelli-Sense Filter MonitorTM Luz de alarma del rodilloInterruptor USO DE LOS Accesorios

EP621 specifications

The Shark EP621 is an innovative cordless vacuum designed to deliver efficient cleaning performance with advanced technology and user-friendly features. This model stands out in the competitive market of home cleaning appliances, primarily due to its powerful suction, versatile design, and intuitive functionalities.

One of the main features of the Shark EP621 is its DuoClean technology, which incorporates two brush rolls. The first brush roll is designed to pick up large debris, while the second, soft brush roll gently pulls in stuck-on dust from hard floors and carpets. This combination ensures a thorough clean, effectively capturing both fine particles and larger debris without the need to switch heads, making transitions between surfaces seamless.

Another significant characteristic of the Shark EP621 is its cordless design. Powered by a high-capacity rechargeable battery, this vacuum allows for hassle-free cleaning without the limitations of a cord, providing a generous runtime that makes it suitable for cleaning larger homes. Moreover, the battery is designed for rapid charging, minimizing downtime between cleaning sessions.

Equipped with advanced LED lights on the floorhead, the EP621 excels in revealing hidden dust and debris in dark corners and under furniture. This feature enhances visibility and ensures that no area is overlooked during the cleaning process.

The Shark EP621 also boasts a lightweight and ergonomic design, making it easy to maneuver around the house. Its compact form allows for comfortable handling, even in tight spaces, which is ideal for cleaning stairs, furniture, and cars.

To further enhance user experience, the vacuum includes a variety of attachments, such as a crevice tool, dusting brush, and pet multi-tasker tool, expanding its versatility for different cleaning tasks. The washable anti-allergen complete seal technology and HEPA filter work together to trap allergens and dust particles, making the Shark EP621 a great choice for allergy sufferers.

In terms of maintenance, the Shark EP621 features a dust cup that can be easily emptied with one hand, simplifying the post-cleaning process. Overall, the Shark EP621 is a remarkable cordless vacuum that combines advanced technologies and thoughtful design, ensuring an efficient and convenient cleaning experience for homeowners.