Graco TI15596a, TI15605a important safety instructions Maintenance

Page 12

Maintenance

Maintenance

Preventive Maintenance

Schedule

The operating conditions of your particular system determine how often maintenance is required. Establish a preventive maintenance schedule by recording when and what kind of maintenance is needed, and then determine a regular schedule for checking your system. Your maintenance schedule should include the follow- ing:

Flushing

•Flush before changing colors, before fluid can dry in the equipment, at the end of the day, before storing, and before repairing equipment.

•Flush at the lowest pressure possible. Check con- nectors for leaks and tighten as necessary.

•Flush with a fluid that is compatible with the fluid being dispensed and the equipment wetted parts.

Air Line Filter

Drain and clean as necessary.

Mix Tank Volume

Do not let the mix tank run dry. When the tank is empty, the pump demands more power as it tries to suck in some fluid. This causes the pump to run too fast, which can seriously damage the pump.

Stall Test

Perform a stall test periodically to ensure the piston seal is in good working condition and prevent system over- pressurization:

Close the fluid shutoff valve (D) closest to the pump on the downstroke and be sure that the pump stalls. Open the fluid shutoff valve to restart the pump. Close the fluid shutoff valve (D) closest to the pump on the upstroke and be sure that the pump stalls.

NOTICE

Do not allow the pump to run quickly for a long period of time as this may damage the packings.

Stop the pump on the downstroke, before the air motor changes over.

NOTICE

Failure to stop the pump at the bottom of its stroke allows fluid to dry on the piston rod, which can dam- age the throat packings and the TSL pump piston seal when the pump is restarted.

12

3A0538F

Page 11 Page 13
Image 12
Page 11 Page 13
Contents High-Flo4-Ball Pumps Contents Models Related ManualsPart No. Description Fire and Explosion Hazard Personal Protective Equipment Installation GroundingFluid supply container follow local code Flush Before Using Equipment Stand Mount PlumbingWall Mount Accessories Air LineFluid Line Fluid shutoff valve D shuts off fluid flowIG . Typical Installation for 1000, 1500, and 2000cc Pumps KeyIG . Typical Installation for 3000 and 4000cc Pumps Key Pressure Relief Procedure OperationPrime the Pump Stop the Pump at the Bottom of Its StrokeMaintenance Changing the TSL Cutaway of TSL Reservoir, and Fill LinesMaintenance Troubleshooting Problem Cause SolutionDisassembly ReassemblyShield Disassembly Shield ReassemblyReassemble the Coupling Adapter and Tie Rods toMotor Coupler Torque ValuesParts High-Flo Pumps with 1000cc, 1500cc, or 2000cc 4-Ball LowersCommon Parts Ratio, 2000cc PumpsRatio, 1500cc Pumps Ratio, 1000cc PumpsHigh-Flo Pumps with 3000cc or 4000 cc 4-Ball Lowers Ratio, 4000cc Pumps Ratio, 3000cc PumpsDimensions WeightApprox Model MotorMotor Mounting Hole Diagrams NXT ModelMounting Stand Hole Layouts Wall Mount Bracket Technical Data Performance Charts Fluid Outlet Pressure Black CurvesAir Consumption Gray Curves NXT 2200 Air Motor, 2000cc Lower JX20XXFluid Flow in GPM LPM AIR Flow NXT 6500 Air Motor, 3000cc Lower JX44XX NXT 6500 Air Motor, 4000cc Lower JX33XXGraco Standard Warranty Graco Information

TI15596a, TI15605a specifications

The Graco TI15605A and TI15596A are high-performance airless paint sprayers manufactured by Graco, a trusted name in the painting industry. These models are designed to meet the needs of professional contractors and DIY enthusiasts alike. With their advanced features and robust technology, they promise efficiency and precision in every application.

One of the main features of the Graco TI15605A is its powerful motor that delivers consistent pressure, allowing users to spray a wide range of coatings, from thin stains to thick latex paints. This model boasts a maximum operating pressure of 3300 PSI, ensuring smooth and even coverage. It also has a significant flow rate, making it ideal for large projects and reducing the amount of time spent on preparation and cleanup.

The TI15596A model, while similar in many technologies, is well-suited for those looking for a more compact solution without sacrificing performance. This sprayer is lightweight and easy to maneuver, perfect for tight spaces and overhead applications. The TI15596A features a 50-foot hose that allows users to cover larger areas without needing to frequently reposition the unit.

Both models are equipped with Graco's patented ProConnect system, which allows for swift pump changes, minimizing downtime on the job site. This innovative technology makes replacing the pump a quick and hassle-free process, ensuring that users can get back to work with minimal interruption.

User convenience is another focal point, as both the TI15605A and TI15596A come with an easy-to-read pressure gauge and a reversible self-cleaning tip. The reversible tip allows users to quickly clear clogs by simply reversing the tip, greatly enhancing user experience and productivity.

Moreover, the sprayers feature a durable construction designed for heavy-duty use, ensuring longevity and reliability even in challenging work environments. They are compatible with a variety of spray tips, providing versatility for different applications and coatings.

In summary, the Graco TI15605A and TI15596A are exceptional choices for anyone in need of a reliable airless paint sprayer. Their advanced features and technologies, including high operating pressure, efficient flow rates, and user-friendly systems, make them ideal for both professional and personal projects. With these sprayers, achieving a flawless finish has never been easier.
Top Page Image Contents