Graco TI15596a Accessories, Air Line, Fluid Line, Fluid shutoff valve D shuts off fluid flow

Page 8

Installation

Accessories

Install the following accessories in the order shown in FIG. 2 and FIG. 3, using adapters as necessary.

NOTE: Accessory Air Control Kits are available for the NXT Air Motor. The kits include a master air valve, air regulator, and filter. Order the kit separately. See man- ual 311239 for more information.

Air Line

See FIG. 2 and FIG. 3.

•Bleed-type master air valve (M): required in your system to relieve air trapped between it and the air motor when the valve is closed.

Trapped air can cause the pump to cycle unexpectedly, which could result in serious injury from splashing or moving parts.

Be sure the valve is easily accessible from the pump and located downstream from the air regulator. Be sure the air bleed hole points away from the operator.

The air motor is rated to 100 psi (0.7 MPa, 7.0 bar). If you will apply more than 100 psi (0.7 MPa, 7.0 bar) to the system, install a safety relief valve between the bleed-type master air valve and the air motor.

•Pump air regulator (L): to control pump speed and outlet pressure. Locate close to the pump.

•Air line filter (K): removes harmful dirt and mois- ture from compressed air supply.

•Second bleed-type air valve (H): isolates air line accessories for servicing. Locate upstream from all other air line accessories.

Fluid Line

See FIG. 2 and FIG. 3.

•Fluid filter: with a 60 mesh (250 micron) stainless steel element to filter particles from the fluid as it leaves the pump.

•Fluid drain valve (N): required in your system, to relieve fluid pressure in the hose and gun.

•Fluid shutoff valve (D): shuts off fluid flow.

8

3A0538F

Page 7 Page 9
Image 8
Page 7 Page 9
Contents High-Flo4-Ball Pumps Contents Part No. Description ModelsRelated Manuals Fire and Explosion Hazard Personal Protective Equipment Fluid supply container follow local code InstallationGrounding Wall Mount Flush Before Using EquipmentStand Mount Plumbing Accessories Air LineFluid Line Fluid shutoff valve D shuts off fluid flowIG . Typical Installation for 1000, 1500, and 2000cc Pumps KeyIG . Typical Installation for 3000 and 4000cc Pumps Key Pressure Relief Procedure OperationPrime the Pump Stop the Pump at the Bottom of Its StrokeMaintenance Changing the TSL Cutaway of TSL Reservoir, and Fill LinesMaintenance Troubleshooting Problem Cause SolutionDisassembly ReassemblyShield Disassembly Shield ReassemblyReassemble the Coupling Adapter and Tie Rods toMotor Coupler Torque ValuesParts High-Flo Pumps with 1000cc, 1500cc, or 2000cc 4-Ball LowersCommon Parts Ratio, 2000cc PumpsRatio, 1500cc Pumps Ratio, 1000cc PumpsHigh-Flo Pumps with 3000cc or 4000 cc 4-Ball Lowers Ratio, 4000cc Pumps Ratio, 3000cc PumpsDimensions WeightApprox Model MotorMotor Mounting Hole Diagrams NXT ModelMounting Stand Hole Layouts Wall Mount Bracket Technical Data Performance Charts Fluid Outlet Pressure Black CurvesAir Consumption Gray Curves NXT 2200 Air Motor, 2000cc Lower JX20XXFluid Flow in GPM LPM AIR Flow NXT 6500 Air Motor, 3000cc Lower JX44XX NXT 6500 Air Motor, 4000cc Lower JX33XXGraco Standard Warranty Graco Information

TI15596a, TI15605a specifications

The Graco TI15605A and TI15596A are high-performance airless paint sprayers manufactured by Graco, a trusted name in the painting industry. These models are designed to meet the needs of professional contractors and DIY enthusiasts alike. With their advanced features and robust technology, they promise efficiency and precision in every application.

One of the main features of the Graco TI15605A is its powerful motor that delivers consistent pressure, allowing users to spray a wide range of coatings, from thin stains to thick latex paints. This model boasts a maximum operating pressure of 3300 PSI, ensuring smooth and even coverage. It also has a significant flow rate, making it ideal for large projects and reducing the amount of time spent on preparation and cleanup.

The TI15596A model, while similar in many technologies, is well-suited for those looking for a more compact solution without sacrificing performance. This sprayer is lightweight and easy to maneuver, perfect for tight spaces and overhead applications. The TI15596A features a 50-foot hose that allows users to cover larger areas without needing to frequently reposition the unit.

Both models are equipped with Graco's patented ProConnect system, which allows for swift pump changes, minimizing downtime on the job site. This innovative technology makes replacing the pump a quick and hassle-free process, ensuring that users can get back to work with minimal interruption.

User convenience is another focal point, as both the TI15605A and TI15596A come with an easy-to-read pressure gauge and a reversible self-cleaning tip. The reversible tip allows users to quickly clear clogs by simply reversing the tip, greatly enhancing user experience and productivity.

Moreover, the sprayers feature a durable construction designed for heavy-duty use, ensuring longevity and reliability even in challenging work environments. They are compatible with a variety of spray tips, providing versatility for different applications and coatings.

In summary, the Graco TI15605A and TI15596A are exceptional choices for anyone in need of a reliable airless paint sprayer. Their advanced features and technologies, including high operating pressure, efficient flow rates, and user-friendly systems, make them ideal for both professional and personal projects. With these sprayers, achieving a flawless finish has never been easier.
Top Page Image Contents