Graco TI15605a, TI15596a Changing the TSL, Cutaway of TSL Reservoir, and Fill Lines

Page 13

Changing the TSL

Check the condition of the TSL and the level in the res- ervoir every week, minimum. TSL should be changed at least every month.

Part No. 206995 Throat Seal Liquid (TSL) carries resi- due from the pump rod into the reservoir. Discoloration of the TSL fluid is to be expected during normal opera- tion. After some time the TSL will thicken and darken, and must be replaced. Thick, dirty TSL will not pump through the lines and will harden in the pump wet-cup.

How long TSL lasts depends on which chemicals are used, how much is used, what pressure, and condition of the pump seal and rod.

A drop in the level of TSL in the reservoir indicates that the throat packings are starting to wear. Add TSL to the reservoir and keep the level above the Minimum fill line. Monitor the usage and condition of the TSL. If pumped material bypasses the throat packings and enters the TSL reservoir, replace the packings.

Maintenance

To change the TSL:

1. Shut off the pump.

To avoid the buildup of static charge, do not rub the plastic bottle with a dry cloth while it is attached to the pump. Remove the bottle to clean, if needed.

2.Remove and empty the reservoir bottle. Clean any residue.

3.Clean screen (Z) of inlet check valve (VI). If check valves are not sealing and dirty TSL is getting into the wet-cup, replace the check valves (VI, VO). See FIG. 4.

4.Fill the reservoir to the Maximum fill line with Throat Seal Liquid (TSL).

5.Run pump. Each time pump rod reaches bottom of stroke, check that some TSL is pumped from reser- voir through wet-cup and back to reservoir.

VO

Maximum Fill Line

Minimum Fill Line

VI

Z

TI15853b

TI15857

 

FIG. 4. Cutaway of TSL Reservoir, and Fill Lines

3A0538F

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents High-Flo4-Ball Pumps Contents Related Manuals ModelsPart No. Description Fire and Explosion Hazard Personal Protective Equipment Grounding InstallationFluid supply container follow local code Stand Mount Plumbing Flush Before Using EquipmentWall Mount Air Line AccessoriesFluid Line Fluid shutoff valve D shuts off fluid flowKey IG . Typical Installation for 1000, 1500, and 2000cc PumpsIG . Typical Installation for 3000 and 4000cc Pumps Key Operation Pressure Relief ProcedurePrime the Pump Stop the Pump at the Bottom of Its StrokeMaintenance Cutaway of TSL Reservoir, and Fill Lines Changing the TSLMaintenance Problem Cause Solution TroubleshootingReassembly DisassemblyShield Disassembly Shield ReassemblyAdapter and Tie Rods to Reassemble the CouplingMotor Coupler Torque ValuesHigh-Flo Pumps with 1000cc, 1500cc, or 2000cc 4-Ball Lowers PartsCommon Parts Ratio, 2000cc PumpsRatio, 1000cc Pumps Ratio, 1500cc PumpsHigh-Flo Pumps with 3000cc or 4000 cc 4-Ball Lowers Ratio, 3000cc Pumps Ratio, 4000cc PumpsWeight DimensionsApprox Model MotorNXT Model Motor Mounting Hole DiagramsMounting Stand Hole Layouts Wall Mount Bracket Technical Data Fluid Outlet Pressure Black Curves Performance ChartsAir Consumption Gray Curves NXT 2200 Air Motor, 2000cc Lower JX20XXFluid Flow in GPM LPM AIR Flow NXT 6500 Air Motor, 4000cc Lower JX33XX NXT 6500 Air Motor, 3000cc Lower JX44XXGraco Information Graco Standard Warranty

TI15596a, TI15605a specifications

The Graco TI15605A and TI15596A are high-performance airless paint sprayers manufactured by Graco, a trusted name in the painting industry. These models are designed to meet the needs of professional contractors and DIY enthusiasts alike. With their advanced features and robust technology, they promise efficiency and precision in every application.

One of the main features of the Graco TI15605A is its powerful motor that delivers consistent pressure, allowing users to spray a wide range of coatings, from thin stains to thick latex paints. This model boasts a maximum operating pressure of 3300 PSI, ensuring smooth and even coverage. It also has a significant flow rate, making it ideal for large projects and reducing the amount of time spent on preparation and cleanup.

The TI15596A model, while similar in many technologies, is well-suited for those looking for a more compact solution without sacrificing performance. This sprayer is lightweight and easy to maneuver, perfect for tight spaces and overhead applications. The TI15596A features a 50-foot hose that allows users to cover larger areas without needing to frequently reposition the unit.

Both models are equipped with Graco's patented ProConnect system, which allows for swift pump changes, minimizing downtime on the job site. This innovative technology makes replacing the pump a quick and hassle-free process, ensuring that users can get back to work with minimal interruption.

User convenience is another focal point, as both the TI15605A and TI15596A come with an easy-to-read pressure gauge and a reversible self-cleaning tip. The reversible tip allows users to quickly clear clogs by simply reversing the tip, greatly enhancing user experience and productivity.

Moreover, the sprayers feature a durable construction designed for heavy-duty use, ensuring longevity and reliability even in challenging work environments. They are compatible with a variety of spray tips, providing versatility for different applications and coatings.

In summary, the Graco TI15605A and TI15596A are exceptional choices for anyone in need of a reliable airless paint sprayer. Their advanced features and technologies, including high operating pressure, efficient flow rates, and user-friendly systems, make them ideal for both professional and personal projects. With these sprayers, achieving a flawless finish has never been easier.
Top Page Image Contents