DRAWING UP THE BOBBIN THREAD
1.Hold the end of the needle thread with your left hand.
2.Turn the balance wheel slowly towards you with your right hand until the needle goes down and comes up. Then stop the balance wheel when the
Lightly draw up the needle thread forming a loop with the bobbin thread.
3.Puil about 15cm (6 inches) of both threads away from you
under the presser foot.
STRAIGHT STITCH AND ZIGZAG STITCH
needle thread
1
2
needle
thread
bobbin
thread
3
English
|
|
| Model 377 |
|
|
| Model 374 |
|
|
| Model 373/372 | |
Presser foot |
|
| zigzag foot |
|
|
| zigzag foot |
|
|
|
|
|
Pattern selector | M ( |
| ) or O ( |
| ) A ( |
| ) or B ( |
| ) ( |
| ) | (for straight stitch) |
|
|
|
|
| ||||||||
|
|
|
|
| ||||||||
|
|
|
|
| ||||||||
| (for straight gtitch) |
| (for straight stitch) | ( | ) | (for zigzag stitch) | ||||||
|
|
|
|
|
|
|
|
1 - 5 (54321) (for zigzag stitch) C ( ) (for zigzag stitch)
Stitch length dial | - |
Starting Sewing
1.Be sure both the threads are drawn back under the presser foot.
2.While holding the threads with your left hand, turn the balance
zigzag foot
wheel toward you to bring the needle into the fabric where you wish to start sewing.
3.Lower the presser foot, and press the speed controller gently, then start sewing slowly.
*Sew a few reverse stitches by pushing reverse button for reinforcing the end of seams.
*Raise the needle to its highest position before turning the pattern selector dial and stitch width dial.
11