Euro-Pro 377, 374, 372, 373 instruction manual Buttons, Sewing Embroidery, Darning Plate

Page 18

SEWING EMBROIDERY

Presser foot

darning plate

Pattern selector

(

 

) or

 

 

zig zag

Raise and take off the foot.

Place the fabric in embroidery hoop. Place darning plate over needle plate (see below). Lower the presser foot lifter. Hold the embroidery hoop firmly with your hand.

While sewing the desired pattern, move the embroidery hoop slowly and do not allow your fingers to get near the needle. *Set the needle thread tension a little looser so that the bobbin thread is not pulled through to the right side of fabric.

(See page 13).

*It is recommended to mark the required embroidery pattern on the right side of the fabric with a pencil or tailor,s chalk.

DARNING PLATE

There are a few times when you want to control the feeding of the fabric yourself. Raise needle to its highest position and raise presser foot. Place darning plate over needle plate aligning two pins of darning plate with holes of needle plate. You may then determine the movement of the fabric yourself. See above for embroidery.

embroidery hoop

English

BUTTONS

 

Model 377

Model 374

Model 373/372

 

 

 

 

 

 

 

Presser foot

button foot

 

 

 

button foot

 

 

 

 

 

 

 

 

 

 

 

 

Pattern selector

1-5(54321)

 

 

 

4-6(

)

 

 

 

 

 

 

 

 

 

 

1.Align two holes of button with slot of presser foot and lower foot to hold the button securely.

2.Turn hand wheel manually until needle point is just above button.

3.Adjust stitch selector so needle enters right hole of button.

4.Turn hand wheel by hand so needle enters second hole. The stitch selector may need to be adjusted again. Stitch a number of times.

NOTE:

You may find it helpful to use trans- parent tape to position your button and to keep it in place during sewing. Tear away after stitching.

5.Finish sewing with an extra two inches of thread remaining. Draw these threads to reverse side of gar- ment and tie.

Button foot

Holes of button

Thread Shank

Sew-through buttons on coats and jackets should nave a thread shank to make them stand away from the fabric. Place a straight pin or sewing machine needle on top of button between the holes, and sew over the pin or needle. Pull thread to back of button and wind around stitches to form a firm shank. Tie thread ends securely.

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents EURO-PRO ±¡ Important Safety Instructions Contents Principal Parts Model Principal Parts ModelHOW to Replace the Sewing Lamp HOW to Connect the Machine to the Power SupplyHOW to USE the Foot Control Principal Parts Model 373/372Thread and Needle Chart Changing the NeedleTo Select a Suitable Needle Removing and Attaching the Presser Foot Regulating the Thread TensionModel Pattern Selector Model 373/372 RE Moving the Bobbin Case and BobbinThreading the Bobbin Case To insert the bobbin case and bobbinWinding the Bobbin Threading Needle Drawing UP the Bobbin Thread Straight Stitch and Zigzag StitchTriple Straight Stretch Stitch Triple Zigzag Stretch StitchTriple Stretch Stitch Model 374/373/372 Overlock Stitch Tricot Zigzag StitchSmocking Stitch Sewing Buttonholes Double Action StitchDecorative Edging Sewing Buttonholes Model 377 Sewing Buttonholes Model 373/372Sewing Zippers Sewing Blind Hems Model 377/374/373/372 Buttons Sewing EmbroideryDarning Plate Cleaning the Feed DOG Cleaning the Shuttle RaceFree ARM Sewing Remedy Remedy

374, 372, 377, 373 specifications

The Euro-Pro series of vacuum cleaners, including models 373, 377, 372, and 374, represent a significant advancement in home cleaning technology. Designed to meet the diverse needs of modern households, these models are renowned for their efficiency, versatility, and user-friendly features.

One of the standout characteristics of the Euro-Pro series is its powerful suction capability. Each model is equipped with a robust motor that ensures effective dirt and debris removal from various surfaces, including carpets, hardwood floors, and upholstery. This powerful suction is complemented by advanced filtration systems that capture dust, allergens, and other microscopic particles, promoting a healthier indoor environment.

In terms of design, the Euro-Pro vacuum cleaners are engineered for convenience and ease of use. The lightweight construction allows for effortless maneuverability around furniture and tight spaces. Some models feature a compact design that makes storage simple, while others come with extendable hoses and onboard tools for cleaning hard-to-reach areas.

Technological innovations are at the heart of the Euro-Pro models. Many incorporate smart sensor technology that automatically adjusts suction power depending on the surface being cleaned. This ensures optimal performance while conserving energy and minimizing noise. The models also often feature bagless designs with easy-to-empty dust canisters, saving users time and money on replacement bags.

The Euro-Pro series is equipped with ergonomic handles and adjustable settings, allowing users to tailor their cleaning experience. The models also often include various attachments—a crevice tool for tight spaces, a dusting brush for delicate surfaces, and upholstery tools for furniture cleaning—making them versatile for various tasks.

Additionally, the Euro-Pro vacuum cleaners are built with durability in mind, utilizing high-quality materials that can withstand daily use. Many models come with warranties that reflect the manufacturer's confidence in their longevity.

In summary, the Euro-Pro 373, 377, 372, and 374 vacuum cleaners feature powerful suction, advanced filtration, and user-friendly designs. With their combination of technology and practicality, these models stand out as excellent choices for anyone looking to maintain a clean and healthy living space. These vacuums not only offer superior performance but also provide the ease and flexibility that busy households demand.
Top Page Image Contents