PRINCIPAL PARTS ( Model 373/372)
1.Bobbin winder thread guide 2.Thread tension dial 3.Pattern selector dial 4.Bobbin winder spindle 5.Bobbin winder stopper 6.Balance wheel
7.Stitch display 8.Reverse button 9.Needle clamp and screw
10.Shuttle cover 11.Presser foot 12.Presser foot thumb screw 13.Needle
14.Screw for face plate 15.Face plate 16.Extension table 17.Presser foot lifter
(Accessories storage compartment)
HOW TO CONNECT THE MACHINE TO THE POWER SUPPLY
1.Fit the machine plug into the machine. 2.Plug the power cord to the power supply.
Note:*Before plugging in the machine, ensure the voltage and
number of cycles indicated, conforms to your electricalSwitch power supply.
HOW TO USE THE FOOT CONTROL
Sewing speed can be varied by the foot control. The harder you press on the controller, the faster the machine runs.
Note:*By releasing the controller, the machine stops running auto- matically.
*Before using the machine, practice controlling the speed without threading.
HOW TO REPLACE THE SEWING LAMP
The sewing lamp is located behind the face plate.
Remove the face plate by loosing the screw of the face plate. Bulb type: To remove...Unscrew
To replace...Screw
Note:*Before replacing a bulb, disconnect the machine from the power supply.
*Bulbs are available from sewing machine retailers.(Use a
Caution!
Before leaving the machine, changing parts or doing any other
work on it, always disconnect the plug from the wall socket.
4