Euro-Pro 373, 374, 372, 377 Removing and Attaching the Presser Foot, Regulating the Thread Tension

Page 7

REMOVING AND ATTACHING THE PRESSER FOOT

To Remove:

1. Turn the balance wheel towards you until the needle is at its highest position.

presser foot lifter

2. By lifting the lever on the back of the foot holder, the presser foot will drop off.

1

Note: *Do not force the presser foot to remove it.

To Attach:

1.Place the presser foot so that the pin on the foot lies just under the groove of the foot holder. Lower the foot holder.

,

2. When the presser foot lifter is raised youll fin d the presser foot is locked in place.

2

lever

groove

1

2

pin

REGULATING THE THREAD TENSION

Generally, should any tension adjustment be necessary, the adjustment can normally be made by regulating the upper thread tension dial only. Bobbin thread tension has been adjusted at the factory and readjustment is seldom required except for special instances, thread and fabric.

Bobbin thread tension is just right when you can pull the thread from bobbin case easily with a little resistance. Thread tension may be adjusted by tightening or loosening the thread tension dial.

 

The needle thread and the bobbin thread

Properly adjusted thread

should interiock in the center of two layers of fabric

tension for straight sewing

 

*How to adjust the bobbin thread tension

The needle thread is too tight

The needle thread is too loose

The bobbin thread ap- pears on the upper surface of the fabrics

The needle thread ap- pears on the underside of the fabrics

Loosen the needle thread tension by moving the dial to the lower number

Tighten the needle thread tension by moving the dial to the higher number

To increase tension, turn screw clock wise.

To decrease tension. turn screw counter- clock wise.

Remember the higher the number, the tighter the tension. Correctly balanced tensions for one fabric may not be suitable for another. The required tension depends upon the stiffness of fabric, thickness of the fabric, numbers of layers of fabric being sewn, as well as the type of stitch you are making. It is better to test the stitch- ing on a scrap of the fabric you are using before starting to make a garment. The general range for many fabrics is 3-5.

6

Page 6 Page 8
Image 7
Page 6 Page 8
Contents EURO-PRO ±¡ Important Safety Instructions Contents Principal Parts Model Principal Parts ModelPrincipal Parts Model 373/372 HOW to Connect the Machine to the Power SupplyHOW to USE the Foot Control HOW to Replace the Sewing LampChanging the Needle Thread and Needle ChartTo Select a Suitable Needle Regulating the Thread Tension Removing and Attaching the Presser FootModel RE Moving the Bobbin Case and Bobbin Pattern Selector Model 373/372To insert the bobbin case and bobbin Threading the Bobbin CaseWinding the Bobbin Threading Needle Straight Stitch and Zigzag Stitch Drawing UP the Bobbin ThreadTriple Zigzag Stretch Stitch Triple Straight Stretch StitchTriple Stretch Stitch Model 374/373/372 Tricot Zigzag Stitch Overlock StitchSmocking Stitch Double Action Stitch Sewing ButtonholesDecorative Edging Sewing Buttonholes Model 373/372 Sewing Buttonholes Model 377Sewing Zippers Sewing Blind Hems Model 377/374/373/372 Sewing Embroidery ButtonsDarning Plate Cleaning the Shuttle Race Cleaning the Feed DOGFree ARM Sewing Remedy Remedy

374, 372, 377, 373 specifications

The Euro-Pro series of vacuum cleaners, including models 373, 377, 372, and 374, represent a significant advancement in home cleaning technology. Designed to meet the diverse needs of modern households, these models are renowned for their efficiency, versatility, and user-friendly features.

One of the standout characteristics of the Euro-Pro series is its powerful suction capability. Each model is equipped with a robust motor that ensures effective dirt and debris removal from various surfaces, including carpets, hardwood floors, and upholstery. This powerful suction is complemented by advanced filtration systems that capture dust, allergens, and other microscopic particles, promoting a healthier indoor environment.

In terms of design, the Euro-Pro vacuum cleaners are engineered for convenience and ease of use. The lightweight construction allows for effortless maneuverability around furniture and tight spaces. Some models feature a compact design that makes storage simple, while others come with extendable hoses and onboard tools for cleaning hard-to-reach areas.

Technological innovations are at the heart of the Euro-Pro models. Many incorporate smart sensor technology that automatically adjusts suction power depending on the surface being cleaned. This ensures optimal performance while conserving energy and minimizing noise. The models also often feature bagless designs with easy-to-empty dust canisters, saving users time and money on replacement bags.

The Euro-Pro series is equipped with ergonomic handles and adjustable settings, allowing users to tailor their cleaning experience. The models also often include various attachments—a crevice tool for tight spaces, a dusting brush for delicate surfaces, and upholstery tools for furniture cleaning—making them versatile for various tasks.

Additionally, the Euro-Pro vacuum cleaners are built with durability in mind, utilizing high-quality materials that can withstand daily use. Many models come with warranties that reflect the manufacturer's confidence in their longevity.

In summary, the Euro-Pro 373, 377, 372, and 374 vacuum cleaners feature powerful suction, advanced filtration, and user-friendly designs. With their combination of technology and practicality, these models stand out as excellent choices for anyone looking to maintain a clean and healthy living space. These vacuums not only offer superior performance but also provide the ease and flexibility that busy households demand.
Top Page Image Contents