Euro-Pro 377, 374, 372, 373 instruction manual ±¡ Important Safety Instructions

Page 2

±¡° IMPORTANT SAFETY INSTRUCTIONS

When using an electrical sewing machine, basic safety precautions should always be followed, including the following.

Read all instructions before using this sewing machine.

This sewing machine is designed for household use.

DANGER- TO REDUCE RISK OF ELECTRIC SHOCK:

A sewing machine should never be left unattended when plugged in. Always unplug this sewing machine from the electrical outlet immediately after using and before cleaning.

Warning -To reduce the risk of burns, fire, electric shock or injury to persons...

1. Do not allow to be used as a toy. Attention is necessary when this sewing machine is used by or near children.

2. Use this sewing machine only for its intended use as described in this manual. Use only attachments recommended by the manufacturer as contained in this manual.

3. Never operate this sewing machine if

it has a damaged cord or plug,

if it is not working properly,

if it has been dropped or damaged,

or dropped into water. Return the

sewing machine to the nearest

authorized dealer or service center for examination, repair,electrical or mechanical adjustment.

4.Never operate the sewing machine with any air openings blocked. Keep ventilation openings from the sewing machine and foot control free from the accumulation of lint, dust, and loose cloth.

5.Never drop or insert any object into any opening.

6.Do not use outdoors.

7.Do not operate where aerosol spray products are being used or where oxygen is being administered.

¡± 8. To disconnect, turn all controls to the off O¡±position, then remove plug from outlet.

9.Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

10.Keep fingers away from all moving parts. Special care is required around the sewing machine needle.

11.Always use the proper needle plate. The wrong plate can cause the needle to break.

12.Do not use bent needles.

13.Do not pull or push fabric while stitching. It may deflect the needle, causing it to break.

¡± 14. Switch the sewing machine off O¡±when making any adjustments in the needle area, such as

threading needle, changing needle, threading bobbin, or changing presser foot and the like.

15.Always unplug sewing machine from the electrical outlet when removing covers, lubricating, or when making any other user servicing adjustments mentioned in the instruction manual.

16.Always unplug before replacing lamp. Replace bulb with the same rated 15 watts.

SAVE THESE INSTRUCTIONS

English

1

Image 2
Contents EURO-PRO ±¡ Important Safety Instructions Contents Principal Parts Model Principal Parts ModelHOW to Replace the Sewing Lamp HOW to Connect the Machine to the Power SupplyHOW to USE the Foot Control Principal Parts Model 373/372To Select a Suitable Needle Thread and Needle ChartChanging the Needle Removing and Attaching the Presser Foot Regulating the Thread TensionModel Pattern Selector Model 373/372 RE Moving the Bobbin Case and BobbinWinding the Bobbin Threading the Bobbin CaseTo insert the bobbin case and bobbin Threading Needle Drawing UP the Bobbin Thread Straight Stitch and Zigzag StitchTriple Stretch Stitch Model 374/373/372 Triple Straight Stretch StitchTriple Zigzag Stretch Stitch Smocking Stitch Overlock StitchTricot Zigzag Stitch Decorative Edging Sewing ButtonholesDouble Action Stitch Sewing Zippers Sewing Buttonholes Model 377Sewing Buttonholes Model 373/372 Sewing Blind Hems Model 377/374/373/372 Darning Plate ButtonsSewing Embroidery Cleaning the Feed DOG Cleaning the Shuttle RaceFree ARM Sewing Remedy Remedy