Thread tension selector 2 e
4.Pull the end of the thread about 10 cm (4”) out from the looper eyelet.
5.Lift the sewing foot o and slide the thread under it; then lower the sewing foot o back down. The lever for lifting and lowering the sewing foot o is located at the rear of the machine, above the sewing lever rod system.
Position the lever to lift the sewing foot o
Thread routing on from the thread guide plate 8
Threading yarns into the needle
For simplification, the individual steps are numbered on the illustrations (1 q, 2 w, 3 e, 4 r, ...).
1.Turn the handwheel 6 to yourself until the needles stand fully at the top.
2.Thread the left and right yarns as shown.
Thread tree 1 (on the left)
|
| Thread guide r and thread guide plate t |
| Thread routing behind the front flap 8 | (on the left) |
|
|
|
|
| - 8 - |