Kompernass KH 4300 manual Technical Data Items supplied

Page 6

Technical Data

Items supplied

Number of threads	4 or 3
Number of needles	2 or 1
Sewing speed	1100 Revs/min
Stitch width	6 mm with 4 threads
	6 mm or 4 mm with 3
	threads
Stitch length	1 – 5 mm
Needles	HA x 1 Nr. 11-14 or
	130/705 Nr. 75-90
Power consumption :	Motor: 90 W
	Bulb: 15 W
	Total: 105 W
Rated voltage:	230 V ~ , 50Hz
Protection class:	II
Bulb power:	15 W
Bulb voltage:	230 V / ~50 Hz
Bulb thread:	E14 thread

The sound intensity level under normal operating conditions amounts to 78dB(A).

Foot pedal

Use only the foot pedal originally supplied with this sewing machine:

-ELECTRONIC FDM Speed Controller

-Type KD-2902

Overlock Sewing Machine

Oil

Waste container

Accessory box

Operating instructions

Replacement (upper blade)

2 Needles Nr. 11

4 Needles Nr. 14 (2 in the machine, pre-installed)

4 Bobbin caps

4 Spool pin (preinstalled)

Allen key

Flat-headed screw- driver

Covering hood

Pincers

Brush

- 4 -

Image 6

Contents Overlock Sewing Machine Page Content Page Safety instructions Intended UsageTechnical Data Items supplied Preparation Adjusting the thread treeDescription of the appliance Bobbin supportsBobbin caps Safety switchConnecting the foot pedal Controlling the sewing speedOpening the free arm Threading yarns into the looperThreading yarns into the needle Trial run Position the lever to lift the sewing foot oSetting the thread tension Cut through the threads with scissorsAdjusting thread tension on the needle threads Adjusting thread tension on the looper threadsOverview of the machine adjustments Setting the stitch length Changing threads binding togetherSetting the cutting width Exchanging needles Replacing bulbs Exchanging the upper bladeAdjusting the sewing foot Close and broad sewing with three threadsSewing freehanded Hemstitch and edging Sewing hemstitchSewing narrow edging Differential feed motion Setting the differential feed motionDifferential feed motion can also be adjusted during sewing Manner of operationUneven material edges and smoothness Avoid ruffles by stretchingTroubleshooting Case of doubt, please contact your waste dispo- sal centre Cleaning and care DisposalStorage This prevents an unintended starting of the machineIntended for commercial applications Warranty and Service ImporterAssured Mail support.ie@kompernass.com