Kompernass KH 4300 manual Cleaning and care Disposal, Storage

Page 23

Cleaning and care

 

Disposal

Attention:

ALWAYS remove the plug j from the mains power socket before cleaning or lubricating the machine. Otherwise there is the risk of you receiving an electric shock!

To ensure that your machine works faultlessly at all times, it must occasionally be cleaned with a brush. This machine requires very little lubrication, as the main components are manufactured from a special material.

Only occasionally lubricate the designated positions:

Do not dispose of the appliance in your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC.

Dispose of the appliance through an approved dis- posal centre or at your community waste facility. Observe the currently applicable regulations.

In case of doubt, please contact your waste dispo- sal centre.

Dispose of all packaging materials in an environmentally friendly manner.

Storage

Attention:

ALWAYS remove the plug j from the mains power socket before storageing the machine.

This prevents an unintended starting of the machine.

When the machine is not in use, always cover it with the hood. This will protect the machine from dust. Store the machine at a clean and dry location.

- 21 -

Image 23
Contents Overlock Sewing Machine Page Content Page Intended Usage Safety instructionsTechnical Data Items supplied Bobbin supports Adjusting the thread treeDescription of the appliance PreparationControlling the sewing speed Safety switchConnecting the foot pedal Bobbin capsThreading yarns into the looper Opening the free armThreading yarns into the needle Position the lever to lift the sewing foot o Trial runCut through the threads with scissors Setting the thread tensionAdjusting thread tension on the looper threads Adjusting thread tension on the needle threadsOverview of the machine adjustments Changing threads binding together Setting the stitch lengthSetting the cutting width Exchanging needles Exchanging the upper blade Replacing bulbsSewing freehanded Adjusting the sewing footClose and broad sewing with three threads Sewing narrow edging Hemstitch and edgingSewing hemstitch Manner of operation Setting the differential feed motionDifferential feed motion can also be adjusted during sewing Differential feed motionAvoid ruffles by stretching Uneven material edges and smoothnessTroubleshooting This prevents an unintended starting of the machine Cleaning and care DisposalStorage Case of doubt, please contact your waste dispo- sal centreMail support.ie@kompernass.com Warranty and Service ImporterAssured Intended for commercial applications