Replacing bulbs
Risk of electric shock
When changing bulbs, ALWAYS remove the plug j from the mains power socket!
1.Remove the small round cover with a needle or something similar.
2.Unscrew the screw completely.
3.Remove the lamp cover.
4.Exchange the bulb. Use a bulb of the type E14, 15 W.
5.Reassemble all of the parts in reverse order.
Exchanging the upper blade
Attention!
Before changing the blade a, ALWAYS remove the plug j from the mains power socket. This prevents an unintended starting of the machine. If you do not, you run a risk of serious injury!
Note:
The lower blade p is manufactured from a special material and normally does not need to be exchanged. Should it at some time become nonetheless damaged, please make contact with our Customer Services.
To exchange the upper blade a when it has become blunt:
1.Open the front flap 8 and turn the handwheel 6 towards yourself until the needles are in the lowest position.
2.Using the screwdriver, loosen the screw on the upper blade holder and remove the upper blade a.
Screwdriver
upper blade a
lower blade p
3.Insert a new upper blade a and lightly tighten the screw on the blade holder.
4.Adjust the upper blade a to that its cutting edge surmounts the cutting edge of the lower blade p by about
5.Now firmly tighten the setscrew in the holder for the upper blade a and close the front flap 8.
- 15 -