Close and broad sewing with three threads
When sewing with this machine you can adjust from four to three threads.
Remove either the left or the right needle (see section "Exchanging needles") and the appropriate thread. The machine is now ready for sewing with three threads.
With exclusive use of the right needle, the stitching length amounts to 4 mm (0.16“).
With exclusive use of the left needle, the stitching length amounts to 6 mm (0.24“).
Sewing freehanded
Freehand operation is excellently suited for the sewing of trouser legs, sleeves and cuffs etc.
Remove the arm support 9, as shown in the illustra- tion, to change from flatbed to free arm operation.
Adjusting the sewing foot
The special sewing foot o is adjusted to the posi- tion N on the countersunk screw at the front of the sewing foot o for normal sewing operations.
Should you wish to sew a hemstitch, simply loosen the large screw lightly and slide the small pin, which protudes from the foot to the left, all the way in. Now the letter R stands on the screw.
- 16 -