|
|
|
|
| CORDING FOOT |
|
| BIAS RUFFLE |
|
|
|
| FABRIC: | Medium weight woven cotton 3” X 8” cut on the bias |
| NEEDLES: | 80/12 Universal |
| THREAD: | 2 cones of serger thread (Needle and Lower Looper) |
|
| 1 cone of Woolly Nylon (Upper Looper) |
|
| Nylon fishing line 20 lb. test |
| PRESSER FOOT: | Cording Foot |
|
|
|
Feet-ures Unit ___pg___
Bernette Advanced Guide Workbook pg.___
Instruction Manual for Cording Foot
•Thread the serger for a
•Turn the Stitch Selection Dial to “C” on the Stitch Display Panel.
•Adjust the Stitch Length to 1.75
•Pull the Stitch Selection Lever/Rolled Hem towards you.
•Cutting Width should be at 2 (normal).
•Attach the Cording Foot.
•Raise the Presser Foot and swing it to the left.
•Following the direction in the Instruction Manual for Cording Foot, insert the nylon fishing line through the Cord Guide.
•Return the Presser Foot to normal sewing position.
•Place the fabric under the Presser Foot and serge along one 8” edge stretching the fabric edge as you sew.
•Return the Stitch Selection Lever/Rolled Hem to normal sewing position (away from you). Return Stitch Length to normal.
•Trim and mount the sample.
1999 BERNINA Of America | Section C - page 18 |