Control Board
The Control Board (Part
NOTE: The bottom three control buttons are preset at the factory and should not require any changes. See “Operating Instructions” and “Daily Operation” section of the manual for instructions on other Control Board settings.
| Recommended Heat Ranges: |
| |||
Low Burn: | Heat Range setting: | 1 |
| Room Air Blower setting: | 1 |
Medium Low: | Heat Range setting: 2 | – 3 | Room Air Blower setting: * | ||
Medium High: | Heat Range setting: | 5 | – 8 | Room Air Blower setting: * | |
High Burn: | Heat Range setting: | 9 |
| Room Air Blower setting: | 9 |
* NOTE: Blower Speed will automatically be adjusted to the desired Heat Range that you select.
CAUTION:
NOTE: The bottom
3buttons are
Call Service at
(800)
Illustration 2a
Control Board
Diagram
Caution
Should you see any evidence of smoke in the hopper (smoke back), immediately close and latch the hopper lid and door to the unit. Open the nearest windows and door to the outside. Then press the OFF button and let the unit cool for at least 3 hours. Do not open the door or hopper lid. This is a maintenance problem that needs to be addressed.
Call Technical Support at (800) 245-6489.
16