Proper Impingement (Baffle) Plate Placement
in Pellet Stove Firebox
Occasionally in shipping, the impingement (baffle) plate may shift out of its proper position. If this is the case with your stove, follow these instructions to return the plate to its proper position.
1.Remove the plate from the stove, holding the plate by its tab handle, with the cutout notch facing upwards.
2.Turn the notched end into the doorway (as shown above), and lift the plate up to allow the bottom of the plate to fit in the doorway.
3.Let the bottom of the plate rest on the firebox, and then push the bottom of the plate flush against the back wall of the firebox. At this point, the plate will lean forward (toward the front of the stove) slightly, and will come in contact with the front of the stove above the door.
4.Finally, center the plate on the firebox, so that it will be centered above the fire when the stove is in operation.
Technical Support: (800)
IMPORTANT NOTICE: This unit must be properly installed to prevent the possibility of a house fire or
Do not use makeshift methods or material which may compromise the installation. Your unit requires periodic maintenance and cleaning (refer to manual). Failure to maintain your unit may lead to a variety of problems, including but not limited to smoke spillage into the home. England’s will not be liable for consequential or indirect damages to property or persons resulting from the use of this product.
Visit our web site at www.englanderstoves.com for helpful information, frequently asked
questions, parts/accessory orders and more!
5