Enviro EF-IV I technical manual Stove will not shut down, Stove keeps going out

Page 27

8.The stove will not shut down

-Check the connections to the 120°F (49°C) exhaust temperature sensor, start-up switch and the start-up timer against the wiring diagram.

-Check the 120°F (49°C) temperature sensor by removing one of the brown wires from the sensor. The unit should shut down right away as long as the start button was not pressed within 15 minutes of this test. If the stove shuts down within 15 minutes, replace the 120°F (49°C) sensor. If the stove does not shut down within 15 minutes, test the switch.

-To test the switch, the stove must be cold. Pull the plug, then plug the stove back in. If the fails to start, Replace the switch.

9.The stove keeps going out

-If the stove goes out and leaves fresh unburned pellets or cigarette-like ashes in the burn pot liner, the fire is going out before the 120°F (49°C) temperature sensor shuts the stove off.

-Check to see that the slider is in the correct position.

-Turn the Dial-a-Fire up slightly (poor quality pellets will require slightly higher settings).

-If the stove goes out and there are partially burned pellets left in the burn pot liner, the stove shuts down due to a lack of air, exhaust temperature or power failure.

-Adjust the slider damper.

-Check to see if the stove needs a more complete cleaning.

-Turn the Dial-a-Fire up slightly (poor quality pellets will require slightly higher settings).

-Did the power go out?

-If the stove goes out and there are no pellets in the liner, the auger is stopping.

-See “The auger motor will not function normally” and “The exhaust blower will not function normally.”

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents EF-IV Operation Envirofire Installation ManualUSE of Cordwood is Prohibited by LAW Important Safety DataI. Pellet Standards Pellet Quality is IMPORTANT, Please Read FollowingAutomatic Safety Features of Your Pellet Stove Turning Your Pellet Stove OFF HOW to Start and Operate Your Pellet ApplianceSLIDER/DAMPER Installation Instructions Clip on Door InstallationSpecial Notes Freestanding ASH PAN # 1 see Areas for Routine InspectionASH PAN and Door Gaskets Burn POT Liner Igniter Tube Fresh AIR Insert ASH RemovalInstallation of fire box backing Electrical Component Functions Auger Motor and Auger START-UP Timer11 F 93C Manual Reset Temperature Sensor EXHAUST/COMBUSTION BlowerVacuum Switch 12 F 71C Temperature Sensor13 F 49C N/O Temperature Sensor SHUT-DOWN Sensor 14 F 49C N/C Temperature Sensor Ignitor Shut Down SensorVent Termination Requirements Deciding Where to Locate Your Pellet ApplianceRemoving Your NEW Stove from IT’S Pallet Fireplace DimensionsClearance to Combustibles Masonry Fireplace Insert INSTALLATION, Model FPIFPI Pedestal Installation Assembling the Face Plate for the FPI ModelStandard 40 X 27 7/8 Clearance to Combustibles Freestanding INSTALLATION, Model FSFreestanding Pedestal Installation AssemblyInstall Four Screws Here Horizontal Exhaust Through the Wall Through Wall Installation Inside Vertical Through the Roof Installation Outside Vertical Pipe Installation Outside Fresh AIR Connections Mobile Home InstallationStove will not start TroubleshootingIgniter- the pellets will not light Stove will not operate when hotExhaust motor will not function normally Convection blower will not function normallyDial-a-fire has no effect on the fire Auger motor will not function normallyStove keeps going out Stove will not shut downWiring Diagram Back Grill Parts ListComponents Exploded EF 4Exploded Steel Components To the Distributor WarrantyFor the do-it-yourself Individual To the Dealer

EF-IV I specifications

The Enviro EF-IV I is an innovative next-generation environmental control unit designed to meet the diverse needs of modern aviation. With a strong focus on efficiency, reliability, and sustainability, the EF-IV I has garnered attention for its cutting-edge features and advanced technologies that elevate cabin comfort while reducing the ecological footprint.

One of the most notable features of the Enviro EF-IV I is its hybrid cooling technology. By integrating both conventional and thermal energy systems, the unit can operate with higher efficiency across various conditions. This technology allows for significant energy savings while maintaining optimal temperature control in the cabin, making it an ideal choice for eco-conscious airlines looking to minimize operational costs.

The EF-IV I boasts a sophisticated air filtration system that enhances cabin air quality. Utilizing advanced HEPA filters and multi-layer filtration processes, this unit captures airborne particles and contaminants, ensuring that passengers breathe clean and fresh air during their flights. Its intelligent monitoring system continuously assesses air quality parameters and adjusts filtration performance in real-time, providing a proactive approach to maintaining a healthy cabin environment.

In terms of user interface, the EF-IV I is equipped with an intuitive digital control panel that allows crew members to easily monitor and adjust settings. This interface features an interactive display providing valuable data on system performance, energy consumption, and maintenance schedules, empowering operators with real-time insights that contribute to seamless operations.

The compact design of the EF-IV I facilitates easier installation and integration into existing aircraft systems, making it a flexible choice for both new aircraft and retrofitting older models. Its lightweight materials and streamlined construction not only minimize weight and improve fuel efficiency but also enhance overall durability and reduce maintenance requirements.

Finally, the Enviro EF-IV I is built with sustainability in mind. Its materials and manufacturing processes are compliant with international environmental standards, ensuring that the unit adheres to stringent regulations and contributes positively to the overall environmental impact of aviation.

With its advanced features, sustainability focus, and commitment to enhancing passenger experience, the Enviro EF-IV I represents a significant step forward in environmental control technology for the aviation industry. It is a testament to the ongoing innovation and dedication to creating a more sustainable future in air travel.
Top Page Image Contents