Enviro EF THERMO 28 technical manual Installation of Expansion Tank

Page 10

Installation

INSTALLATION OF EXPANSION TANK:

The expansion tank MUST be installed before this unit can be used.

1.Remove the expansion tank from the box located in the hopper.

2.Loosen the four (4) screws pointed out in Figure 11. Lift the back grill up and remove it from the unit.

3.Apply thread sealant to the fitting point out in Figure 12 then tighten the expansion tank onto the

fitting.

Figure 11

Figure 12

VENT TERMINATION REQUIREMENTS:

It is recommended that your pellet stove be installed by an authorized dealer/installer.

Use Table 2 in conjunction with Figure 13 for allowable exterior vent termination locations.

		Table 2

	Minimum Clearance	Description

A	24 in (61 cm)	Above grass, top of plants, wood, or any other combustible materials.

B	48 in (122 cm)	From beside/below any door or window that may be opened.

C	24 in (61 cm)	From above any door or window that may be opened.

D	24 in (61 cm)	To any adjacent building, fences and protruding parts of the structure.

E	24 in (61 cm)	Below any eave or roof overhang

F	12 in (30 cm)	To outside corner.

G	12 in (30 cm)	To inside corner, combustible wall (vertical and horizontal terminations).

H	3 ft (91 cm) within a height of 15 ft (4.5	To each side of center line extended above natural gas or propane meter/
	m) above the meter/regulator assembly	regulator assembly or mechanical vent.

I	3 ft (91 cm)	From any forced air intake of other appliance

J	12 in (30 cm)	Clearance to non-mechanical air supply inlet to building, or the combustion
		air inlet to any appliance.

K	24 in (61 cm)	Clearance above roof line for vertical terminations.

L	7 ft (2.13 m)	Clearance above paved sidewalk or paved driveway located on public
		property.

10

Image 10

Contents Technical Manual Table of Contents Introduction Introduction Specifications Unit Dimensions Water Temperature Limit Switch Located behind right Air Bleeder Valve shown in FigureAsh drawer Cover Installation Installation of Expansion Tank Termination Cap Gas Meter Air Supply Inlet Restriction Zone Back wall to unit Inch Supply Horizontal Through Wall Installation Through Wall Installation Inside Vertical Installation Outside Vertical Installation Thermostat Installed Homes as well as in Air Tight homesStove will not operate when hot TroubleshootingStove will not start Convection blower will not function normally Control settings Heat Level have no effect on the fireExhaust motor will not function normally Ignitor- the pellets will not lightHeat Output Indicator Shows the present heat output Water Temperature Dial Read in degrees CelsiusIs solid, setting can be altered Setting. Has lights 1Wiring Diagram Parts List Reference Part Description Part NumberParts Diagram Components Parts Diagram Body Warranty For the do-it-yourself IndividualInstallation Data Sheet Name of Owner Address

EF THERMO 28 specifications

The Enviro EF THERMO 28 is a cutting-edge multifuel stove that exemplifies efficient heating and contemporary design, making it an attractive option for homeowners seeking both functionality and aesthetics. This stove is engineered to optimize performance while reducing environmental impact, aligning with today’s energy-conscious lifestyles.

One of the standout features of the EF THERMO 28 is its impressive efficiency rating. It boasts an efficiency level of over 80%, ensuring that a significant portion of the fuel burned is converted into usable heat. This high efficiency minimizes fuel consumption, making it not only cost-effective but also environmentally friendly by decreasing emissions.

The stove is designed to burn a wide range of fuels, including wood, pellets, and even coal, providing users with flexibility depending on their heating needs and fuel availability. The advanced combustion system employed in the EF THERMO 28 utilizes secondary air injection, which promotes a cleaner burn and enhances overall heating performance. This technology not only contributes to lower emissions but also ensures that the stove operates effectively even in varying conditions.

Another notable characteristic of the EF THERMO 28 is its robust construction. Built from high-quality steel and equipped with a ceramic glass door, the stove is designed to withstand high temperatures while maintaining safety and durability. The design also features a large viewing window, allowing for an inviting aesthetic appeal as flames dance within the firebox.

The stove’s intuitive control system is user-friendly, featuring an adjustable air control that allows users to fine-tune the burn rate for optimal heat output. This enables more precise heating management, enhancing comfort in the home while also conserving fuel. Additionally, its compact size makes it suitable for various spaces, whether it be a rustic cabin or a modern home.

Overall, the Enviro EF THERMO 28 represents a blend of innovation, efficiency, and style. With its multifuel capabilities, high efficiency, advanced combustion technologies, and user-friendly features, this stove is an ideal choice for those looking to enhance their heating experience while adhering to eco-friendly practices. Whether for primary heating or supplementary warmth, the EF THERMO 28 provides an effective solution that caters to diverse preferences and needs in home heating.