Enviro EF THERMO 28 technical manual Warranty, For the do-it-yourself Individual

Page 26

Warranty

Sherwood Industries Ltd. gives a five year limited warranty on all steel manufactured parts. A one-year warranty is provided on all electrical components. The above limited warranties are extended only to the original purchaser.

There is no warranty on the following parts:

●Glass window

●Fiberglass rope gaskets

●refractory material

●burn pot liner

●paint

●enamel finish or gold plating where it applies

●vacuum hose.

**NOTE: The paint on the brick firebox lining may peel. This is due to the extreme conditions applied to the paint and is in no way covered under warranty.

WHEN FILING A WARRANTY CLAIM PLEASE COMPLETE THE FOLLOWING INFORMATION

ON AN OFFICIAL WARRANTY CLAIM FORM:

TO THE DEALER:

-Name and address of dealer,

-Date of purchase

-Name, address and telephone number of purchaser

-Name, address and telephone number of installer

-Date of installation, and

-Serial number of the appliance

Ensure that you specify the nature of the complaint, defect, periodical malfunction, etc.

TO THE DISTRIBUTOR:

-Sign and verify that work and information are correct.

-Description and part # of any parts replaced.

The limited warranty covers defects in materials and workmanship as long as the products has been installed according to the manual’s instruction. If the product is damaged or broken as a result of mishandling or misuse, the warranty does not apply. Removal and re-installation costs are not covered under this warranty.

It is the manufacturer’s option whether to repair or replace the appliance. The shipping cost to and from the factory is to be paid by the consumer. All warranties by the manufacturer are set forth herein and no claim shall be made against the manufacturer on any oral warranty or representation.

The manufacturer assumes no responsibility for damage caused by household power fluctuations or power surges.

Under Warranty

For the do-it-yourself Individual

The consumer should be aware that the pellet appliance needs setting using tools that he/she might not have. It is recommended that you have a qualified installer install your pellet appliance

Sherwood Industries Ltd. reserves the right to make changes without any notice.

26

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Technical Manual Table of Contents Introduction Introduction Specifications Unit Dimensions Water Temperature Limit Switch Located behind right Air Bleeder Valve shown in FigureAsh drawer Cover Installation Installation of Expansion Tank Termination Cap Gas Meter Air Supply Inlet Restriction Zone Back wall to unit Inch Supply Horizontal Through Wall Installation Through Wall Installation Inside Vertical Installation Outside Vertical Installation Thermostat Installed Homes as well as in Air Tight homesStove will not start TroubleshootingStove will not operate when hot Convection blower will not function normally Control settings Heat Level have no effect on the fireExhaust motor will not function normally Ignitor- the pellets will not lightHeat Output Indicator Shows the present heat output Water Temperature Dial Read in degrees CelsiusIs solid, setting can be altered Setting. Has lights 1Wiring Diagram Parts List Reference Part Description Part NumberParts Diagram Components Parts Diagram Body Warranty For the do-it-yourself IndividualInstallation Data Sheet Name of Owner Address

EF THERMO 28 specifications

The Enviro EF THERMO 28 is a cutting-edge multifuel stove that exemplifies efficient heating and contemporary design, making it an attractive option for homeowners seeking both functionality and aesthetics. This stove is engineered to optimize performance while reducing environmental impact, aligning with today’s energy-conscious lifestyles.

One of the standout features of the EF THERMO 28 is its impressive efficiency rating. It boasts an efficiency level of over 80%, ensuring that a significant portion of the fuel burned is converted into usable heat. This high efficiency minimizes fuel consumption, making it not only cost-effective but also environmentally friendly by decreasing emissions.

The stove is designed to burn a wide range of fuels, including wood, pellets, and even coal, providing users with flexibility depending on their heating needs and fuel availability. The advanced combustion system employed in the EF THERMO 28 utilizes secondary air injection, which promotes a cleaner burn and enhances overall heating performance. This technology not only contributes to lower emissions but also ensures that the stove operates effectively even in varying conditions.

Another notable characteristic of the EF THERMO 28 is its robust construction. Built from high-quality steel and equipped with a ceramic glass door, the stove is designed to withstand high temperatures while maintaining safety and durability. The design also features a large viewing window, allowing for an inviting aesthetic appeal as flames dance within the firebox.

The stove’s intuitive control system is user-friendly, featuring an adjustable air control that allows users to fine-tune the burn rate for optimal heat output. This enables more precise heating management, enhancing comfort in the home while also conserving fuel. Additionally, its compact size makes it suitable for various spaces, whether it be a rustic cabin or a modern home.

Overall, the Enviro EF THERMO 28 represents a blend of innovation, efficiency, and style. With its multifuel capabilities, high efficiency, advanced combustion technologies, and user-friendly features, this stove is an ideal choice for those looking to enhance their heating experience while adhering to eco-friendly practices. Whether for primary heating or supplementary warmth, the EF THERMO 28 provides an effective solution that caters to diverse preferences and needs in home heating.
Top Page Image Contents