Enviro C-11150 technical manual Refer to Figures 17

Page 15

 

Installation

HEARTH MOUNT INSTALLATION:

 

 

 

 

������ �������

 

 

 

�� �������� ����

 

 

Flue

��� ����� ��� ������

Refer to Figures 17 and 18.

������� �� ��� ���

Connector

���� ��� �� �����

1.

Install the hearth pad.

 

 

 

 

 

2.

Lock fireplace damper in the open position.

 

 

3.

Install a positive flue connector at the

 

 

 

fireplace dampers or seal the chimney at

 

 

 

the top.

���������

 

4.

Connect a tee to the exhaust pipe.

 

���� ���

5.

Install flexible stainless steel liner or listed

 

��� ��

 

 

 

 

 

pellet vent to the top of the chimney.

 

�����

 

 

 

����������

 

 

������� ���������

����������� �����

 

 

Figure 17: Freestanding hearth mount installation.

Rain cap

Storm collar

Seal plate (cover plate)

Existing masonry flue

Vent pipe (single wall stainless flex pipe or solid PL vent)

Flexible vent connector (use this 5 foot [152cm] section of pipe to vent past fireplace damper or small shelf)

Fireplace damper location

Clean out tee

Existing fireplace

Figure 18: Freestanding hearth mount installation overview.

15

Image 15
Contents Mini Table of Contents USE of Cordwood is Prohibited by LAW IntroductionIntroduction Introduction Screws to take out to remove stove from Pallet InstallationDimensions of Mini 91.5 cm Letter Minimum Clearance Description Fresh AIR Intake 75mm Wall thimble Manufactured by pellet vent manufacturer Allows installation with the least amount Is the recommended installation set up Place a non-combustible hearth pad where Refer to Figures 17 Exterior Blower Kit Through Wall Installation with Exterior Blower Kit Sheathing Cabinet side and locate the slider damper plate. Install Special Notes Kit Components Installing the PanelsInstalling Hopper Lid Installing Hopper LidTroubleshooting Stove will not operate when hotStove will not start 200 F 93 C high limit temperature sensor has tripped Exhaust motor will not function normallyLight # 2 on Heat output bar flashing Stove keeps going out Control settings Heat Level has no effect on the fireConvection blower will not function normally Ignitor- the pellets will not lightWiring Diagram Reference Description Part Number Parts ListParts List Parts Diagram Components SDiagramPartsteel Warranty To the DealerTo the Distributor Exclusions and Limitations Warranty Name of Owner Address Installation Data Sheet

C-11150 specifications

Enviro C-11150 is a state-of-the-art equipment designed to address the increasing demand for efficient environmental management solutions in industrial applications. This machine stands out in the market due to its high-performance capabilities, which help businesses optimize their operations while adhering to strict environmental regulations.

One of the main features of the Enviro C-11150 is its advanced filtration system. This technology utilizes multiple stages of filtration, ensuring that even the smallest particulate matter is effectively eliminated from water, air, and other waste streams. This not only enhances the overall quality of the output but also guarantees compliance with environmental standards, minimizing the risk of penalties and fines for businesses.

The Enviro C-11150 is equipped with an innovative control system that allows for seamless monitoring and management of various environmental parameters. Users can easily access real-time data and analytics through a user-friendly interface, enabling them to make informed decisions. Additionally, the system is designed for remote monitoring, allowing operators to keep track of their processes from anywhere, enhancing operational efficiency.

Another critical characteristic of the Enviro C-11150 is its energy-efficient design. By incorporating cutting-edge technologies, the machine reduces energy consumption significantly, leading to lower operational costs for users. This is particularly important for industries looking to minimize their carbon footprint and promote sustainability in their practices.

The Enviro C-11150 also boasts a compact design, making it suitable for a variety of installation environments. Despite its small footprint, it delivers robust performance, effectively accommodating the needs of different sectors, from manufacturing to waste management.

Moreover, the machine is constructed with high-quality materials that ensure durability and longevity. This minimizes maintenance requirements and downtime, which is advantageous for businesses aiming to maintain uninterrupted operations.

In conclusion, the Enviro C-11150 is a revolutionary solution in the field of environmental management. Its advanced filtration system, innovative control technologies, energy efficiency, compact design, and durable construction collectively make it an excellent choice for industries seeking to enhance their environmental practices while maintaining high operational standards.