Harman Stove Company P68 Room Sensor and Rear Shield Installation, Room Sensor Installation

Page 21

Room Sensor and Rear Shield Installation

Room Sensor Installation

Room

Sensor

Port

5/16" Hex Head Screws (3 on each side)

Fig. 24

Rear Shields

5/16" Hex Head Screws (3 on each side)

Fig. 25

The room sensor is a small temperature sen- sor on the end of a 60" gray wire. This sensor is installed much like a standard wall thermostat. Be- cause it is so small, it can be hidden along the trim of a doorway or even up the leg of a coffee table. There is a remote room sensor port on the rear of the unit for easy external connection. Use standard 18-2 thermostat wire to extend the distance to the desired location (100' maximum). The room sen- sor should be installed in the location where you want to control the temperature.

In most installations locating the room sensor behind the stove near the distribution fan works well because the sensor monitors the room air being drawn into the distribution fan.

NOTE: Distances of more than 25 feet from the unit or in another room are not recommended. The room sensor is essential for the P68's excel- lent efficiency.

NOTE: It is recommended that the room sensor be installed, even if only installed on the rear of the unit as a return air sensor.

The rear insulated shields are split in the middle for easy removal. Each shield has (3) 5/16" hex head screws. Two (2) that only need to be loosened, and one (1) that needs to be completely removed, to allow the shield to slide away from the unit. NOTE: It is not recommended that the unit be operated with the shields removed, due to the hot and moving parts which they protect.

P68 Pellet Stove 21

Page 20 Page 22
Image 21
Page 20 Page 22
Contents Safety Notice Installation & Operating ManualP68 Pellet Stove Introduction Table of ContentsImportant Notes Door Handle Installation Assembly and InstallationInstalling InstallationWith outside air installed, 6 feet With outside air installedVenting Addition, the following must be observedVent Pipe VentingHRV Outside Air#1 Preferred method #2 Preferred methodThroughs #5 Installing into an existing fireplace chimney US only #4 Installing into an existing chimney US only#7 Installing into an existing chimney US and Canada #8 Installing through the ceiling Minimum flue vent configurationP68 Automatic IGNITION/OPERATION Room Temperature ModeFeed Adjuster Knob Stove Temperature Mode Shut Down ProcedureTurn Mode Selector to OFF Igniter Switch toAUTOup positionTurn Feed Adjuster to #4.4 P68 Automatic Start UPRoom Temperature Mode Stove Temperature ModeP68 Manual IGNITION/OPERATION Igniter Switch toMANUAL down position P68 Manual Start UPFill hopper with pellets and remove ashes as required.1 P68 Automatic Ignition ESP Control Status light error messagesLow Draft Voltage Adjustment P68 Low Draft Voltage AdjustmentRoom Sensor and Rear Shield Installation Room Sensor InstallationRear Shields Cleaning the Door Glass MaintenanceCleaning Removing AshesSoot and FlyAsh Cause a House FireBurn Pot Cleaning and Maintenance P68 Maintenance Burn PotP68 Maintenance Gasket Adjustment P68 Maintenance Cleaning the Feeder Body Cleaning Burn Pot P68 Trouble-ShootingSpecifications P68 Feeder and SpecificationsSide Heat Shields OptionsFloor Protector Hopper ExtensionP68 Wiring Diagram Description Part Number P68 Parts ListYear Limited Warranty Commercial Harman Gold Warranty

P68 specifications

The Harman Stove Company P68 is a high-efficiency pellet stove that stands out for its blend of advanced technology and user-friendly features. Designed for both comfort and convenience, the P68 offers a remarkable heating capacity while maintaining an appealing aesthetic that fits well with a variety of home interiors.

One of the key features of the P68 is its impressive heating capability. With the ability to produce up to 68,000 BTUs, this stove can effectively heat spaces of up to 3,800 square feet. This makes it an excellent choice for both residential and larger commercial environments. The P68’s large hopper capacity, capable of holding up to 68 pounds of pellets, allows for extended burn times, providing homeowners with less frequent refueling.

The stove is equipped with Harman’s patented Smart Control technology, which optimizes fuel efficiency and heat output. This intelligent control system continuously monitors the burn rate and adjusts the feed rate of pellets accordingly. This ensures a consistent and comfortable temperature while minimizing waste. Users can also take advantage of the intuitive digital control panel, which allows for easy temperature adjustments and programming options.

In terms of design, the P68 is as functional as it is stylish. It features a large viewing window, allowing users to enjoy the beauty of the flames and create a cozy atmosphere. The stove is also available in multiple color finishes, ensuring it can complement any home decor.

Another standout characteristic of the P68 is its ease of maintenance. The design includes a removable ash pan for quick and straightforward cleaning. Furthermore, the patented burn pot design minimizes clinkers, reducing the need for frequent maintenance.

The Harman Stove Company P68 also emphasizes safety with its built-in safety features, including a pressure switch that monitors venting blockages, ensuring safe operation. With its combination of high efficiency, advanced technology, and user-friendly design, the P68 is an excellent choice for anyone looking to enhance their home heating system while prioritizing both comfort and style. Whether for a chilly winter evening or a cozy family gathering, the Harman P68 continues to be a superior option for pellet heating solutions.
Top Page Image Contents