Harman Stove Company P68 owner manual Installation, Installing

Page 6

Installation

Installing

Place the stove on a noncombustible floor pro- tector that extends a minimum of 6 inches to the front, 2 inches to the sides and flush with the rear of the hopper. See Fig. 6.The minimum floor protector ma- terial is 20 gauge sheet metal. Other floor protector materials are ceramic tile, stone, brick, etc.

Place the stove away from combustible walls at least as far as shown in Figures 3,4 and 5. Please note the difference in side wall clearance with and without side shields.

Note that the clearances shown are minimum for safety but do not leave much room for access when cleaning or servicing. Please take this into ac- count when placing the stove.

Connect the power cord to a 120 V.A.C. 60Hz grounded receptacle. (A surge protector is recom- mended to protect the circuit board.) If the voltage entering your home is below 116 volts your stove may not work properly. Also be sure that the polarity of the outlet that the stove is plugged into is correct.

Prior to installing the flue pipe, connect a draft meter. (The draft meter must have a minimum range of 0-.5.)Record the first reading. Connect flue pipe to stove and be sure all doors and windows in the home are closed. Record the second draft read- ing_______. If the second reading is more than .05"

lower than the first reading, check for possible re- strictions or the need for outside air (see page 8). For more information on the draft test procedure, re- fer to Page 19.

Mobile Home Installation

When installing this unit in a mobile home sev- eral requirements must be followed:

1.The unit must be bolted to the floor. This can be done with 1/4" lag screws through the 2 holes in the base plate.

2.The unit must also be connected to outside air. See page 8.

3.Floor protection and clearances must be fol- lowed as shown.

4.Unit must be grounded to the metal frame of the mobile home.

CAUTION: This appliance must be vented to the outside.

Due to high temperatures, the stove should be placed out of traffic and away from furniture and drap- eries.

Children and adults should be alerted to the haz- ards of high surface temperatures and should stay away to avoid burns to skin and/or clothing.

Young children should be carefully supervised when they are in the same room as the stove.

Clothing and other flammable materials should not be placed on or near this unit.

Installation and repair of this Harman stove should be done by a qualified service person. We recommend that the stove be inspected before use and at least annually by a qualified service person. Periodic clean- ing is required throughout the heating season and at the end of each winter for the stove to work efficiently. See cleaning instructions on page 21.

9"-13"

9"-13"

9" With Side Shields

13" Without Side Shields

Fig. 3

2"

14"

Fig. 4

2"

20"

Fig. 5

Floor Protection must be 2 inches to each side, 6 inches to the front, and 0 inches to the back of the stove.Floor Protector minimum: 25" widex 33" deep.

25" minimum

 

 

0"

 

 

(even with

 

 

hopper)

33" minimum

2"

2"

 

 

 

 

6"

Fig. 6

6P68 Pellet Stove

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Installation & Operating Manual Safety NoticeP68 Pellet Stove Table of Contents IntroductionImportant Notes Assembly and Installation Door Handle InstallationInstallation InstallingVenting With outside air installedWith outside air installed, 6 feet Addition, the following must be observedVenting Vent PipeOutside Air HRV#1 Preferred method #2 Preferred methodThroughs #4 Installing into an existing chimney US only #5 Installing into an existing fireplace chimney US only#7 Installing into an existing chimney US and Canada Minimum flue vent configuration #8 Installing through the ceilingRoom Temperature Mode P68 Automatic IGNITION/OPERATIONStove Temperature Mode Shut Down Procedure Feed Adjuster KnobTurn Feed Adjuster to #4.4 Igniter Switch toAUTOup positionTurn Mode Selector to OFF P68 Automatic Start UPRoom Temperature Mode Stove Temperature ModeP68 Manual IGNITION/OPERATION Igniter Switch toMANUAL down position P68 Manual Start UPFill hopper with pellets and remove ashes as required.1 Status light error messages P68 Automatic Ignition ESP ControlP68 Low Draft Voltage Adjustment Low Draft Voltage AdjustmentRoom Sensor and Rear Shield Installation Room Sensor InstallationRear Shields Cleaning MaintenanceCleaning the Door Glass Removing AshesCause a House Fire Soot and FlyAshP68 Maintenance Burn Pot Burn Pot Cleaning and MaintenanceP68 Maintenance Gasket Adjustment P68 Maintenance Cleaning the Feeder Body P68 Trouble-Shooting Cleaning Burn PotP68 Feeder and Specifications SpecificationsFloor Protector OptionsSide Heat Shields Hopper ExtensionP68 Wiring Diagram P68 Parts List Description Part NumberHarman Gold Warranty Year Limited Warranty Commercial

P68 specifications

The Harman Stove Company P68 is a high-efficiency pellet stove that stands out for its blend of advanced technology and user-friendly features. Designed for both comfort and convenience, the P68 offers a remarkable heating capacity while maintaining an appealing aesthetic that fits well with a variety of home interiors.

One of the key features of the P68 is its impressive heating capability. With the ability to produce up to 68,000 BTUs, this stove can effectively heat spaces of up to 3,800 square feet. This makes it an excellent choice for both residential and larger commercial environments. The P68’s large hopper capacity, capable of holding up to 68 pounds of pellets, allows for extended burn times, providing homeowners with less frequent refueling.

The stove is equipped with Harman’s patented Smart Control technology, which optimizes fuel efficiency and heat output. This intelligent control system continuously monitors the burn rate and adjusts the feed rate of pellets accordingly. This ensures a consistent and comfortable temperature while minimizing waste. Users can also take advantage of the intuitive digital control panel, which allows for easy temperature adjustments and programming options.

In terms of design, the P68 is as functional as it is stylish. It features a large viewing window, allowing users to enjoy the beauty of the flames and create a cozy atmosphere. The stove is also available in multiple color finishes, ensuring it can complement any home decor.

Another standout characteristic of the P68 is its ease of maintenance. The design includes a removable ash pan for quick and straightforward cleaning. Furthermore, the patented burn pot design minimizes clinkers, reducing the need for frequent maintenance.

The Harman Stove Company P68 also emphasizes safety with its built-in safety features, including a pressure switch that monitors venting blockages, ensuring safe operation. With its combination of high efficiency, advanced technology, and user-friendly design, the P68 is an excellent choice for anyone looking to enhance their home heating system while prioritizing both comfort and style. Whether for a chilly winter evening or a cozy family gathering, the Harman P68 continues to be a superior option for pellet heating solutions.
Top Page Image Contents