Harman Stove Company TL200 manual Installation, Blower optional, Outside Air optional

Page 11

Exception TL200 Wood Stove

Installation

DO NOT INSTALL IN A SLEEPING ROOM

Assembly

Blower (optional)

Bolt the mounting plate to the bottom rear of the stove with four 1/4-20 bolts. Put the blower in place on the bracket and bolt fast. Tighten the bolts, but do not over- tighten.

The power cord for the blower must be connected to a grounded outlet, and may not be routed above, under, over or around the stove itself.

Blower Variable

Speed knob

3" Outside Air

Outside Air (optional)

The Exception is designed to accommodate the use of outside air introduced directly to the stove. The opening is located at the back of the stove behind the

pedestal. An outside air connector plate attaches over this opening, using two 1/4-20 x 1/2"” hex head bolts.

Outside air is always required when installing the Exception in a mobile home, and is required for every in- stallation by certain local building codes. Check with your local building inspector to find out requirements. Some signs to watch for that indicate a possible need for outside air: poor performance of other heaters or of the Exception, including smoke roll-out and odor; the disappearance of the same symptoms when a window is opened near the stove; and condensation on windows in the winter. Mod- ern homes with tight windows and doors, vapor barriers, and particularly with exhaust systems are the most likely to require outside air.

An outside air duct less than 5' (1525 mm) long may be 3" [80mm] in diameter, and be made of masonry tile, 26 gauge (0.019)galvanized steel, or other noncom- bustible material; it should have a 1" (25 mm) clearance to combustibles. Systems longer than 5' (1525 mm), or con- taining more than two elbows, should have a 4" (100 mm) diameter duct to provide an adequate flow of combustion air. Any system must have a damper that is capable of fully closing. The air duct must terminate outside the dwell- ing and be screened to keep debris, birds or animals out.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Harman Exception Wood Stove Installation & Operating ManualIntroduction Table of ContentsSpecifications Specifications Doors OperationDraft FuelCombustion in your Harman Exception is controlled Combustion Process ControlsBlower Air Control Building and Maintaining the FireReloading Operating as a Fireplace Afterburner ViewportRemoving Ashes Disposal of AshesMaintenance Creosote GasketsHandle Outside Air optional InstallationBlower optional Clearances Parallel versus Corner InstallationsFloor Protection Paw Bolt Door Assembly/Installation TipsDoor Glass Glass Retainer ClipsRemove left side shield Exception Linkage InstallationSlots for side shield tabs Install the drive arm Things to Check Exception Linkage Installation, contdInstall the top lift arm Re-attach left side shieldException Linkage Installation, contd Wall Pass-throughs Chimney ConnectorsVenting Chimney Venting to a Masonry Fireplace Chimney Installing to a Prefabricated ChimneyExisting Masonry Chimneys Venting to a Masonry ChimneyVenting Mobile Homes Moblie Home InstallationsException Parts List Exception TL200 Parts Harman Gold Warranty Harman Gold Warranty

TL200 specifications

The Harman Stove Company TL200 is a standout pellet stove designed to deliver both efficiency and elegance to any home. Recognized for its robust construction and advanced features, the TL200 is a popular choice among homeowners looking to maximize heat while minimizing environmental impact.

One of the main features of the TL200 is its high-efficiency pellet burning capability. The stove boasts an impressive EPA certification, which means it meets strict environmental standards for emissions. This is essential not only for regulatory compliance but also for residents who are mindful of their carbon footprint. The stove efficiently converts pellets into heat, with low emissions that contribute to cleaner air quality.

The TL200 incorporates innovative technology to ensure optimal performance. It comes equipped with an intuitive digital control panel, allowing users to easily adjust the heating output according to their needs. This feature is complemented by an automatic igniter that takes the hassle out of starting the stove. With a programmable thermostat, homeowners can maintain their desired temperature effortlessly, leading to energy savings and enhanced comfort.

Another notable characteristic of the TL200 is its large hopper capacity. The stove is designed to hold a substantial amount of pellets, providing extended burn times. This means less frequent reloading, allowing for uninterrupted heating during those cold winter months. The TL200 can burn for up to 48 hours on a single load, making it an excellent choice for both convenience and efficiency.

The design of the TL200 is another aspect that sets it apart. It combines traditional aesthetics with modern functionality. The stove features a sleek, contemporary look, available in various finishes to complement any décor. The large viewing window allows users to enjoy the beauty of the flames while providing adequate heat to the room.

Safety features are also paramount in the TL200 design. The stove includes a built-in safety sensor that monitors temperature levels, ensuring that the unit does not overheat. An automatic shutoff feature provides peace of mind for homeowners, making it a safe option for families.

In conclusion, the Harman Stove Company TL200 pellet stove stands out for its eco-friendly burning technology, user-friendly controls, ample fuel capacity, attractive design, and safety features. For those seeking a reliable and efficient heating solution, the TL200 is an impressive option that combines performance with style.
Top Page Image Contents