Maintenance

Exception TL200 Wood Stove

Like all fine equipment, your Exception requires some routine maintenance and inspection. Follow the guide- lines in this section to guarantee safe, efficient operation.

The Stove

Surface

The stove’s exterior surface should be dusted pe- riodically with a soft cloth. For more thorough cleaning, wait until the stove is cool before using a damp cloth to clean any blemishes.

The Door

If you have a gold plated front door it should never be buffed or polished. Abrasive cleaners and metal pol- ishes will remove the plating and therefore should never be used. If the door needs to be cleaned, wait until the stove is completely cool, then use a sponge, soap and water to gently remove dirt and stains. Before relighting the stove, remove all soap residue and wipe dry.

Controls

To avoid a rust build-up on the inner surfaces of the controls, work the controls back and forth several times, during the summer, or any prolonged period when you are not using your stove.

Glass Gasket

Glass

Hold Down Clips

and Bolts

The Fire Chamber

The inside of the fire chamber should be exam- ined for damage to the refractory lining material, grates, casting or Afterburner glass. If any bricks have been dam- aged, replace them with Harman Stove Company replace- ment parts.

Glass - Replacement

If the stove’s glass is cracked or broken, you must replace it before operating your stove. Remove pieces carefully. Replace glass only with Harman Stove Com- pany replacement glass panels; do not use substitutes.

To replace the glass panel, you will need to re- move the door. To do this, open the door, lift it straight up and place it on a soft surface.

Carefully remove damaged glass, gasket material, and hold down clips (set aside).

Referring to the diagram, note how the various com- ponents of the door system fit together. Lay the load door

face down on the soft surface, and install the self adheasive 1/4"” gasket material around the front face of the glass.

Note: this glass has a special IR coating on one side. This coating must be to the outside of the stove. The coated side has a label on it. Do not remove the label before in- stalling the glass. If label is missing, check for continuity.

Set the glass pane and gasket gently onto the door. Install the hold down clips and tighten with bolts as shown. Make sure there are no lumps in the gasket and tighten the screws at an even amount. Reinstall door on

stove.

Door

Glass - Cleaning

Sometimes it will be necessary to clean ac- cumulated ash from the glass surface; allowing

this ash to remain on the glass for long periods can result in “etching” due to the acidity of the

ash. The creosote which accumulates on the glass should burn off during your hot fires.

Never clean the glass while it is hot, and do not use abrasive substances. Wash the surface with cool water, and rinse thoroughly. You may wish to use a non-abrasive cleaner specifically designed for use on stove glass. In any case, dry thoroughly before relighting your stove.

TL200 specifications

The Harman Stove Company TL200 is a standout pellet stove designed to deliver both efficiency and elegance to any home. Recognized for its robust construction and advanced features, the TL200 is a popular choice among homeowners looking to maximize heat while minimizing environmental impact.

One of the main features of the TL200 is its high-efficiency pellet burning capability. The stove boasts an impressive EPA certification, which means it meets strict environmental standards for emissions. This is essential not only for regulatory compliance but also for residents who are mindful of their carbon footprint. The stove efficiently converts pellets into heat, with low emissions that contribute to cleaner air quality.

The TL200 incorporates innovative technology to ensure optimal performance. It comes equipped with an intuitive digital control panel, allowing users to easily adjust the heating output according to their needs. This feature is complemented by an automatic igniter that takes the hassle out of starting the stove. With a programmable thermostat, homeowners can maintain their desired temperature effortlessly, leading to energy savings and enhanced comfort.

Another notable characteristic of the TL200 is its large hopper capacity. The stove is designed to hold a substantial amount of pellets, providing extended burn times. This means less frequent reloading, allowing for uninterrupted heating during those cold winter months. The TL200 can burn for up to 48 hours on a single load, making it an excellent choice for both convenience and efficiency.

The design of the TL200 is another aspect that sets it apart. It combines traditional aesthetics with modern functionality. The stove features a sleek, contemporary look, available in various finishes to complement any décor. The large viewing window allows users to enjoy the beauty of the flames while providing adequate heat to the room.

Safety features are also paramount in the TL200 design. The stove includes a built-in safety sensor that monitors temperature levels, ensuring that the unit does not overheat. An automatic shutoff feature provides peace of mind for homeowners, making it a safe option for families.

In conclusion, the Harman Stove Company TL200 pellet stove stands out for its eco-friendly burning technology, user-friendly controls, ample fuel capacity, attractive design, and safety features. For those seeking a reliable and efficient heating solution, the TL200 is an impressive option that combines performance with style.