Floor Protection, Clearances | Harman Stove Company TL200 specification

Exception TL200 Wood Stove

Installation

Floor Protection

In all installations, the area under and around the stove must be protected from falling ash and live coals. The area under a horizontal run of chimney connector must also be protected . This protector must be of noncombus- tible material, and positioned as shown in the accompa- nying illustration. The guidelines for floor protection are:

1)completely under the stove and any horizontal runs of connector; 2) 8"(200mm) in back of the stove; 3) 8"(200 mm) to each side; 4) U.S. 16"(405 mm) in front of the doors; Canada 18" (450 mm) in front of the doors; 5) 2" (50 mm) to each side of any horizontal runs of chimney connector.

Clearances

Clearance is the empty space required between the stove or chimney connector to the nearest combus- tible surface or object, such as walls,ceilings, floors, or furniture. Clearance distances may only be reduced by using methods approved by either the CAN/CSAB365 stan- dard (Canada) or NFPA 211 (U.S.) Contact your building authority for information if you are interested in reducing clearance distances other than those presented here.

Parallel versus Corner Installations

A parallel installation is one in which the back and sides of the stove are parallel to the walls behind and to the side of the stove. A corner installation is one in which the back of the stove is positioned diagonally across a corner of the room. Each installation requires its own set of clearances.

For parallel installations, the required clearance distances from the stove are: 1) to the side wall, 20" (450mm); 2) to the back wall, 14" (360 mm). From the chimney connector to the wall, 18"(360 mm) and to the ceiling, 18"(450 mm). NOTE: For a vertical chimney con- nector in a parallel installation the distance of the connec- tor to the side wall must be 32"(720 mm), due to the re- quired side clearance of the stove itself. Fireplace instal- lations must meet these same clearance requirements; specifically follow these guidelines for mantel and trim clearances.

For corner installations, the clearance distances from the stove are 14"(360 mm) from each corner of the stove measured straight back to the nearest combustible mate- rial, and 22" 360 mm from the chimney connector to the walls.

From the front of the stove, clearance to combus- tible materials such as furniture, curtains, fuel, etc., is:

4 8 "( 1 2 1 5 m m) in th e	U.S. and 60"
(1525 mm) in Canada.

14" 18"

14"

22"

20"

14"

16"

TL200 specifications

The Harman Stove Company TL200 is a standout pellet stove designed to deliver both efficiency and elegance to any home. Recognized for its robust construction and advanced features, the TL200 is a popular choice among homeowners looking to maximize heat while minimizing environmental impact.

One of the main features of the TL200 is its high-efficiency pellet burning capability. The stove boasts an impressive EPA certification, which means it meets strict environmental standards for emissions. This is essential not only for regulatory compliance but also for residents who are mindful of their carbon footprint. The stove efficiently converts pellets into heat, with low emissions that contribute to cleaner air quality.

The TL200 incorporates innovative technology to ensure optimal performance. It comes equipped with an intuitive digital control panel, allowing users to easily adjust the heating output according to their needs. This feature is complemented by an automatic igniter that takes the hassle out of starting the stove. With a programmable thermostat, homeowners can maintain their desired temperature effortlessly, leading to energy savings and enhanced comfort.

Another notable characteristic of the TL200 is its large hopper capacity. The stove is designed to hold a substantial amount of pellets, providing extended burn times. This means less frequent reloading, allowing for uninterrupted heating during those cold winter months. The TL200 can burn for up to 48 hours on a single load, making it an excellent choice for both convenience and efficiency.

The design of the TL200 is another aspect that sets it apart. It combines traditional aesthetics with modern functionality. The stove features a sleek, contemporary look, available in various finishes to complement any décor. The large viewing window allows users to enjoy the beauty of the flames while providing adequate heat to the room.

Safety features are also paramount in the TL200 design. The stove includes a built-in safety sensor that monitors temperature levels, ensuring that the unit does not overheat. An automatic shutoff feature provides peace of mind for homeowners, making it a safe option for families.

In conclusion, the Harman Stove Company TL200 pellet stove stands out for its eco-friendly burning technology, user-friendly controls, ample fuel capacity, attractive design, and safety features. For those seeking a reliable and efficient heating solution, the TL200 is an impressive option that combines performance with style.