Harman Stove Company TL200 manual Exception Linkage Installation, contd, Install the top lift arm

Page 15

Exception TL200 Wood Stove

Exception Linkage Installation, cont'd

Before side shield is in place.

slots for side shield tabs

Side Shield

After side shield is in place.

Figure 4

Step 3: Install the top lift arm

Tighten the 1/4-20 x 5/8 button head allen bolt. Bolt into the tab on the underside of the top lid. This bolt can be tightened fully. (See Fig. 6 & 7)

Slide the top lift arm onto the shoulder pin on the drive arm. Check positioning of top lift arm. (See Fig. 5)

Using the 1/4-20 lock nut, secure the top lift arm to the lid. NOTE: The top lift arm needs to move on the bolt. Do not tighten the lock nut. You can turn it snug then back off 1/2 turn.

Operate the complete linkage using the drive arm handle. You'll know if your bolts are too loose or too tight.

Step 4: Re-attach left side shield.

Place side shield under top load door arm

Place tabs in slots and press down to lock into position.

Things to Check

Make sure the top load door (lid) is centered from left to right. It is possible for it to get bumped off center during shipping and installation. This lid can be recentered by tapping in the proper direction with a block of wood.

In extreme cases the lift lug (Fig 7) can get bent. Check to see that it is 90o fromthe lid. If adjustment is necessary the lug can be straightened with a large adjustable wrench.

Self-Locking Nut

Figure 5

Shoulder Pin

Self-Locking Nut

Before tightening

the nut be sure

the bolt is tight

in the lid.

Figure 6

15

Image 15
Contents Harman Exception Wood Stove Installation & Operating ManualIntroduction Table of ContentsSpecifications Specifications Doors OperationDraft FuelCombustion in your Harman Exception is controlled Combustion Process ControlsAir Control Building and Maintaining the Fire ReloadingBlower Operating as a Fireplace Afterburner ViewportRemoving Ashes Disposal of AshesMaintenance Gaskets HandleCreosote Installation Blower optionalOutside Air optional Parallel versus Corner Installations Floor ProtectionClearances Paw Bolt Door Assembly/Installation TipsDoor Glass Glass Retainer ClipsException Linkage Installation Slots for side shield tabs Install the drive armRemove left side shield Things to Check Exception Linkage Installation, contdInstall the top lift arm Re-attach left side shieldException Linkage Installation, contd Chimney Connectors VentingWall Pass-throughs Chimney Venting to a Masonry Fireplace Chimney Installing to a Prefabricated ChimneyExisting Masonry Chimneys Venting to a Masonry ChimneyVenting Mobile Homes Moblie Home InstallationsException Parts List Exception TL200 Parts Harman Gold Warranty Harman Gold Warranty

TL200 specifications

The Harman Stove Company TL200 is a standout pellet stove designed to deliver both efficiency and elegance to any home. Recognized for its robust construction and advanced features, the TL200 is a popular choice among homeowners looking to maximize heat while minimizing environmental impact.

One of the main features of the TL200 is its high-efficiency pellet burning capability. The stove boasts an impressive EPA certification, which means it meets strict environmental standards for emissions. This is essential not only for regulatory compliance but also for residents who are mindful of their carbon footprint. The stove efficiently converts pellets into heat, with low emissions that contribute to cleaner air quality.

The TL200 incorporates innovative technology to ensure optimal performance. It comes equipped with an intuitive digital control panel, allowing users to easily adjust the heating output according to their needs. This feature is complemented by an automatic igniter that takes the hassle out of starting the stove. With a programmable thermostat, homeowners can maintain their desired temperature effortlessly, leading to energy savings and enhanced comfort.

Another notable characteristic of the TL200 is its large hopper capacity. The stove is designed to hold a substantial amount of pellets, providing extended burn times. This means less frequent reloading, allowing for uninterrupted heating during those cold winter months. The TL200 can burn for up to 48 hours on a single load, making it an excellent choice for both convenience and efficiency.

The design of the TL200 is another aspect that sets it apart. It combines traditional aesthetics with modern functionality. The stove features a sleek, contemporary look, available in various finishes to complement any décor. The large viewing window allows users to enjoy the beauty of the flames while providing adequate heat to the room.

Safety features are also paramount in the TL200 design. The stove includes a built-in safety sensor that monitors temperature levels, ensuring that the unit does not overheat. An automatic shutoff feature provides peace of mind for homeowners, making it a safe option for families.

In conclusion, the Harman Stove Company TL200 pellet stove stands out for its eco-friendly burning technology, user-friendly controls, ample fuel capacity, attractive design, and safety features. For those seeking a reliable and efficient heating solution, the TL200 is an impressive option that combines performance with style.