Listing Label, Freestanding Installation

36	Listing Label

FREESTANDING INSTALLATION

STANDARDRESIDENTIALFREESTANDINGINSTALLATIONSREQUIRE:6”diameter,minimum24MSGblackor25MSGbluedsteelconnector, withlistedUL-103HTfactory-builtchimney,suitableforusewithsolidfuelsormasonrychimney.Pedestalorlegsarerequired.

ALCOVEINSTALLATIONSREQUIRE:OneoftheListeddoublewallconnectorslistedbelow.Pedestalorlegsarerequired.Maximumalcove depth48”,minimumalcoveheight84”.

MOBILEHOMEANDREDUCEDCLEARANCEINSTALLATIONSREQUIRE:OneoftheListeddoublewallconnectorslistedbelow.Inaddition, mobilehomeinstallationsrequireoutsideair-usetheAvalonRainieroptionalpedestaloroutsideairboot. Pedestalorlegsarerequired.

directlytoappliance	modelSSIIchimney
GSWmodelSuperChimneyTwenty-Oneconnected	SELKIRKMETALBESTOSmodelDSconnectorwith	DURAVENTModelDVLwithDURA-TECHchimney
• • •
DURAVENTmodelDVLwithDURA-PLUSchimney	AMERI-TECmodelDCCwithmodelHSchimney	SECURITYmodelDPwithSECURITYmodelASHTorS2100chimney
• • •

	Rainier45	Alcove,Mobilehome,andreduced	clearanceconventionalresidential	Installation	16.0in.	14.0in.	07.5in.	25.5in.	10.0in.	12.0in.
FreestandingInstallation	Rainier45	Singlewallconnector	Conventionalresidential	Installation	14.0in.	17.5in.	11.0in.	24.0in	15.5in.	16.5in.
ClearancetoCombustibleMaterials-	Rainier90	Alcove,Mobilehome,andreduced	clearanceconventionalresidential	Installation	14.0in.	09.5in.	07.5in.	23.5in.	10.25in.	16.0in.
Minimum	Rainier90	Singlewallconnector	Conventionalresidential	Installation	14.0in.	14.5in.	11.0in.	24.0in.	15.75in.	20.0in.
					SidewalltoUnit	BackwalltoUnit	CornertoUnit	SidewalltoConnector	BackwalltoConnector	CornertoConnector
					A. B. C. D. E. F.

ProtectionDiagram	Floorprotectionmustbeanon-com-	bustiblematerialextendingbeneaththe	heaterandtothefront,sidesandback asindicated.SeeOwner'sManualfor examplesofnon-combustiblematerials		thatcanbeused.
Floor	FLOORPROTECTOR	6	6 6	STOVE	16FRONT

AlcoveSpecifications	Max.AlcoveDepth48in.	Min.AlcoveHeight84in.	Min.AlcoveWidth 990:53.5in. 945:57.5in.
DiagramClearance	ADJACENTWALL	ADJACENT WALL
		45˚	C
		F
Freestanding		E B
	BACKWALL		STOVE
		D	A

		SIDEWALL

10850 117th Pl. N.E. Kirkland, WA 98033

Manufactured By:

U.S.ENVIRONMENTALPROTECTIONAGENCY tocomplywithJuly1990particulateemissionstandards.	DateofManufacture
Certified

2002 2003 2004 Jan. Feb. Mar. Apr. May June July Aug. Sept. Oct. Nov. Dec.

0338 (IGN)

DO NOT REMOVE THIS LABEL Made in U.S.A.

SerialNumber
DONOTREMOVETHISLABEL	CONTACTLOCALBUILDINGORFIREOFFICIALSABOUT INSTALLATIONANDRESTRICTIONSINYOURAREA. HEATERSOLIDFUELTYPEAPPLIANCEALSOFORUSEINMOBILEHOMES	FORUSEINFACTORY-BUILT(Z.C.)FIREPLACESANDMASONRYFIREPLACES.
	ROOM	SUITABLE

Rainier45

945(45°Flue)

MODEL:

Rainier90		990(TopFlue)

1482ANDAPPLICABLESECTIONSOFUL127,737AND907.	FORUSEWITHSOLIDWOODFUELONLY
Testedto:UL
#028-S-45-4
Report

PREVENT HOUSE FIRES - Install and use only in accordance with the manufacturer’s installation and operating instructions. Contact your local building or fire officials about restrictions and installation inspection in your area. Refer to local building codes and manufacturer’s instructions for precautions required for passing a chimney through a combustible wall or ceiling. Do not run a chimney connector through a combustible wall or ceiling. Do not connect this unit to a chimney flue serving another appliance. Clearances may be reduced by methods specified in NFPA 211, listed wall shields, pipe shields, or other means approved by local building or fire officials. Inspect and clean chimney frequently, under certain conditions of use creosote build up may occur rapidly. Do not overfire. If heater glows, you are overfiring. Maintain 36” front clearances to all furnishings and other combustible materials. Do not use grate or elevate fire, build wood fire directly on hearth. Operate only with door closed. OPTIONAL EQUIPMENT: Front or rear blower (electrical rating: 115V, 60 Hz., 1.8 Amps) Replace glass only with AVALON supplied NEOCERAM ceramic glass (5mm). Do not route power cord under or in front of appliance.

LISTED FIREPLACE INSERT FOR INSTALLATION INTO A FACTORY-BUILT (Z.C.) FIREPLACE OR MASONRY FIREPLACE

Factory-Built	(Z.C.)Fireplace	Installations	30.0” 12.0” 12.0”	N/A 24.0” N/A	16”	8”
Masonry	Fireplace	Installations	14.0” 13.0” 29.5” 14.5” 31.5” 16.5”		16”	8”
MinimumClearanceto	CombustiblesandHearth	Requirements	A. B. C.	WithShield D. WithShield	HearthExtensionFront	HearthExtensiontoSides
	FACING COMBUSTIBLE				NON-COMBUSTIBLE	FIREPLACEFACING
	MANTEL		D	B INSERT	F	HEARTHEXTENSION
			C
					E
				A
SIDEWALL COMBUSTIBLE

Factory-Built (Z.C.) Fireplace installations require a minimum 24” starter section directly connected to the fireplace chimney or a full re-line. Factory-Built (Z.C.) Fireplace chimney must have a minimum cross-sectional area of 28.85”. The Factory-Built (Z.C.) Fireplace damper and control must be removed, or secured in the open position. For minimum Factory-Built (Z.C.) Fireplace firebox size, see manufacturer’s installation instructions. Factory-Built (Z.C.) Fireplace floor protection must be 3/8” minimum non-combustible material or equivalent, extending 16” in front of insert and 8” to both sides. A metal deflector plate must be installed if the flue collar is not completely behind the lintel plate of the Factory-Built (Z.C.) Fireplace openings.

BTUsin/Ft÷-hr°fat	flueconnection.
havingathermalconductivityofK=0.72	fireplace.Installwithorwithoutadirect
Combustiblefloorbeyondhearthmustbeprotectedbyaminimum0.25inchesthickinsulatingboard, 800°f,orequivalent.(SeeOwnersManualforexamples)	Allfireplaceinstallationsrequirefacingshroudplates.Donotremovefirebrickormortarfrommasonry

Travis Industries

100-01140

4 020628

Avalon Stoves Rainier owner manual Listing Label, Freestanding Installation

Listing Label

FREESTANDING INSTALLATION

FreestandingInstallation

Minimum

ProtectionDiagram

Manufactured By:

DONOTREMOVETHISLABEL

MODEL:

Rainier90

990(TopFlue)

Requirements

HEARTHEXTENSION

SIDEWALL COMBUSTIBLE

BTUsin/Ft÷-hr°fat

flueconnection.