Icom AP-12 instruction manual Enter Click, About IP Address

FIXED IP ADDRESS SETTING 3

uWhen the PC cannot access the AP-12 due to a network address difference between them, the following screen appears.

Enter the desired unique host address for the PC, then click <Next>.

•When the PC can access the AP-12, the screen described in step !2appears.

•The default IP address of the AP-12 is “192.168.0.1”.

•Enter a value other than “1” in the address box.

1.Enter

2.Click

DAbout IP Address

The IP addresses consist of two ele- ments, network part and host address. For example, “192.168.0.1” (default IP address of the AP-12; class C) has the network part “192.168.0” and host address “1”. Network devices, such as the PC, with the same network part are recognized in the same network, and the each device is distinguished by the host address. Pay attention to the notes at right when obtaining IP addresses.

•Assign the same network to the all network devices in the same group.

•Assign an unique host address for each device in the same group.

•NEVER assign a “network address” (host address is 0 or starting from 0.)

•NEVER assign a “broadcast address” (host address is 255).

3

19