Icom AP-12 LAN interface, Transmission rate, User interface, System requirements

Page 83

	REFERENCES 7
• LAN interface	: Ethernet plug (Type RJ-45)
	Based on IEEE802.3/10BASE-T
• Transmission rate	: 10 Mpbs
• User interface	: Status indicators (Power, Wired LAN,
	Wireless LAN)
• System requirements	: PC/AT compatible computer
	Windows XP/Windows Me/Windows
	2000/Windows 98 or Windows 98 SE.

*The stated specifications may be subject to change without notice.

*The transmission range may vary depending on the transmission speed and the environmental conditions.

■Specifications for Ethernet Plug

											Modular plug type RJ-45 (8-pin) ⋅1
											Modular plug type RJ-45 (8-pin) ⋅1
											1.	Sending (+)	2.	Sending (–)
	1	2	3	4 5 6 7 8							3.	Receiving (+)	4.	Not used
											5.	Not used	6.	Receiving (–)
											7.	Not used	8.	Not used

* The stated specifications may be subject to change without notice.

■Wireless LAN for the AP-12

To communicate with the AP-12, the PC must be installed with Icom’s Wireless LAN products for 11 Mbps.

•WEP security function is available with use during communication between Icom products.

•Bridge Mode is not available except with Icom products.

•When functional mode is Bridge Mode B, select the AP-12 as the access point.

7

69

Image 83

Contents AP-12 Page About exchanging the AP-12 or the PC connected to the AP-12 IntroductionForeword Features AP-12 Following notational conventions are used in this manual General PrecautionsAccessories Table of Contents IP Configuration …………………………………51-56 Safety Precautions Rcaution AC adapter General PrecautionsPage About the Ethernet card ……………………………………………………………8 Wireless functional modes …………………………………………………………2Installation location …………………………………………………………………7 Access point mode default Wireless functional modesAbout a MAC address Unit description Accessory attachment AC adapter Ethernet cable To avoid interferenceInstallation precautions Installation locationExamples of recommended installation Examples of installation not recommendedDesktop PC About the Ethernet cardChapter About Dhcp server detection Connecting to a LANProcedure Click Installing AP-12 ManagerClick Finish Installation is now completed About AP-12 icon Starting AP-12 ManagerTo exit AP-12 Manager AP-12 Manager Setting ScreenFixed IP Address Connecting to the PC Using Easy Setting Wizard When no access point is found About IP Address Enter ClickEasy Setting Wizard will restart automatically Click Next 0Click Next Select Click ESS ID is changeable later. See p for details 7Click Finish Installing AP-12 Manager Click Finish Installation is now completed Displays the connected AP- 12’s IP address To exit the AP-12 Manager AP-12 Manager Settings screen Page AP-12 Manager screen descriptions …………………………………………32 AP-12 Manager screen descriptions SettingsBe entered default LG Preferred Bssid Remote MAC AddressCommunication channels Hidden wireless terminalsIP Configuration MAC security Wep Security Wep settings ……… Key generator ……WEP Key Setting Examples- 64-bit encryption Show Station Version Information Options MAC security Wep Security Default settingsUninstalling AP-12 Manager Setting Examples Access point mode Individual settings Bridge mode a Peer-to-PeerCommon settings Functional mode Select Bridge Mode aFunctional mode Select Bridge Mode B Preferred BSS ID Bridge mode B Client ModeCommon setting AP-12 1 and 2 settingsFunctional mode Bridge mode C Multi-siteAll AP-12s settings Page IP Configuration For Windows XP Click Enter For Windows 98/98SE/Me For Windows Click Glossary ……………………………………………………………………………70 Program Possible Cause Solution TroubleshootingDhcp Connect to the Cascade Port Connecting the AP-12 and HUBVerifying the connection to the AP-12 Connect to the Cross PortFailure in searching for the AP-12 When using Easy Setting Wizard D When using AP-12 ManagerClick Verify Set Click IP address confirmation Windows XP ProcedureWindows 2000 Procedure Windows 98/98SE/Me ProcedureConnection to the router type modem Wireless terminal preparationRouter Type Modem Connection to the router type modem ProcedureWhen communication has failed Specifications System requirements LAN interfaceTransmission rate User interfaceGlossary BSS ID Basic Service Set-IDentifier10BASE-T Memo Memo