Icom AP-12 instruction manual IP Configuration

Page 65

IP CONFIGURATION

Chapter 6

This chapter describes about changing the PC’s IP address.

Changing of the PC’s IP address is required when setting up a LAN used with the AP-12 with a fixed IP setting and a PC.

The default IP address is used with the AP-12 (192.168.0.1) for the setting descrip- tion in this chapter.

Changing the PC’s IP address is not necessary when the PC has been connect- ed to a LAN with a DHCP server, and obtains an IP address from the DHCP serv- er.

6-1 For Windows XP ……………………………………………………………………52

6-3 For Windows 98/98SE/Me…………………………………………………………54

6-2 For Windows 2000 …………………………………………………………………55

[Setting the IP address and subnet mask]

•Set a unique IP address for each PC in the network group.

•Set the same subnet mask for all PCs in the network group.

•Set private addresses. 192.168.0.0 to 192.168.255.255 are used for a small net- work group (up to 253 terminals). However, never assign the network address (192.168.XXX.0) and broadcast address (192.168.XXX.255) to the terminal.

(XXX: 0 to 255)

See the following address examples of a wireless LAN comprised of three PCs. Wireless terminal A: 192.168.0.10 (subnet mask: 255.255.255.0)

Wireless terminal B: 192.168.0.11 (subnet mask: 255.255.255.0)

Wireless terminal C: 192.168.0.12 (subnet mask: 255.255.255.0)

Image 65

Contents AP-12 Page About exchanging the AP-12 or the PC connected to the AP-12 IntroductionForeword Features AP-12 Following notational conventions are used in this manual General PrecautionsAccessories Table of Contents IP Configuration …………………………………51-56 Safety Precautions Rcaution AC adapter General PrecautionsPage About the Ethernet card ……………………………………………………………8 Wireless functional modes …………………………………………………………2Installation location …………………………………………………………………7 Access point mode default Wireless functional modesAbout a MAC address Unit description Accessory attachment AC adapter Ethernet cable To avoid interferenceExamples of recommended installation Installation locationExamples of installation not recommended Installation precautionsDesktop PC About the Ethernet cardChapter About Dhcp server detection Connecting to a LANProcedure Click Installing AP-12 ManagerClick Finish Installation is now completed About AP-12 icon Starting AP-12 ManagerTo exit AP-12 Manager AP-12 Manager Setting ScreenFixed IP Address Connecting to the PC Using Easy Setting Wizard When no access point is found About IP Address Enter ClickEasy Setting Wizard will restart automatically Click Next 0Click Next Select Click ESS ID is changeable later. See p for details 7Click Finish Installing AP-12 Manager Click Finish Installation is now completed Displays the connected AP- 12’s IP address To exit the AP-12 Manager AP-12 Manager Settings screen Page AP-12 Manager screen descriptions …………………………………………32 AP-12 Manager screen descriptions SettingsBe entered default LG Preferred Bssid Remote MAC AddressCommunication channels Hidden wireless terminalsIP Configuration MAC security Wep Security Wep settings ……… Key generator ……WEP Key Setting Examples- 64-bit encryption Show Station Version Information Options MAC security Wep Security Default settingsUninstalling AP-12 Manager Setting Examples Access point mode Common settings Bridge mode a Peer-to-PeerFunctional mode Select Bridge Mode a Individual settingsCommon setting Bridge mode B Client ModeAP-12 1 and 2 settings Functional mode Select Bridge Mode B Preferred BSS IDFunctional mode Bridge mode C Multi-siteAll AP-12s settings Page IP Configuration For Windows XP Click Enter For Windows 98/98SE/Me For Windows Click Glossary ……………………………………………………………………………70 Program Possible Cause Solution TroubleshootingDhcp Verifying the connection to the AP-12 Connecting the AP-12 and HUBConnect to the Cross Port Connect to the Cascade PortFailure in searching for the AP-12 When using Easy Setting Wizard D When using AP-12 ManagerClick Verify Set Click IP address confirmation Windows XP ProcedureWindows 2000 Procedure Windows 98/98SE/Me ProcedureConnection to the router type modem Wireless terminal preparationRouter Type Modem Connection to the router type modem ProcedureWhen communication has failed Specifications Transmission rate LAN interfaceUser interface System requirementsGlossary BSS ID Basic Service Set-IDentifier10BASE-T Memo Memo