Icom instruction manual To exit the AP-12 Manager

3 FIXED IP ADDRESS SETTING

3-4 Starting [AP-12 Manager] (continued)

eWhen the error dialog “Cannot connect to the access point” appears on the screen, each AP-12 and the PC’s network IP address may be different. In such a case, click <OK> and close the dialog. Then, exit [AP-12 Manager].

To exit the AP-12 Manager:

Move the cursor on the icon in the task bar, then right-

click. Then select “Exit” in the menu that appears.

rFollow the steps q to i in Chapter 3-2 (p. 17) to set up the PC again.

tThe following screen appears after rebooting. Click <Cancel>.

Click

yFollow the steps q and w in Chapter 3-4 (p. 27) to re-starting [AP-12 Manager] again.

•[AP-12 Manager] Settings screen as in page 29 is displayed when the setting is successful.

28