Casablanca Fan Company 54005, 54007, 54006 Canopy, Insert the two canopy screws Found Hardware bag

Page 11

Canopy

Screw

Position the canopy so that, when	Lift the canopy into place so that
lifted into place, the canopy fits into	the screw holes are aligned.
the hanging bracket as shown.

www.CasablancaFanCo.com 1.888.227.2178

Note: Fan style may vary.

Image 11

Contents Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet BoxFor angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Remove the shipping blocks from Ceiling Bracket Installation PreparationDownrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrodFan Put the wires and downrod throughWiring Insert the two canopy screws Found Hardware bag CanopyYou kept after removing BladesFeed the wire plug through the center Switch HousingSocket Shade Socket Ring Socket Ring Tool Light KitHardware bag With bulbs of same wattage Insert three 3 switchHousing screws found Maintenance & Cleaning Fan doesn’t work Troubleshooting