Casablanca Fan Company 54007, 54006, 54005 operation manual Tools Needed

Page 3

Tools Needed

www.CasablancaFanCo.com

1.888.227.2178

Ladder

Pliers

Wire Strippers

Screwdrivers

Power Drill

(optional)

9/64” Drill Bit

(optional)

If mounting to a support structure, you will also need these tools.

3

M6004-01 • 08/13/12 • © Casablanca Fan Company

Image 3

Contents Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet BoxCeiling Bracket Installation Make sure all four 4 bumpers Are still attachedFor angled ceilings, point Opening toward peak Remove the shipping blocks from Ceiling Bracket Installation PreparationDownrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrodFan Put the wires and downrod throughWiring Insert the two canopy screws Found Hardware bag CanopyYou kept after removing BladesFeed the wire plug through the center Switch HousingSocket Shade Socket Ring Socket Ring Tool Light KitInsert three 3 switch Housing screws foundHardware bag With bulbs of same wattage Maintenance & Cleaning Fan doesn’t work Troubleshooting