Casablanca Fan Company 54005, 54007, 54006 Remove the pre-installed Hand tighten the downrod at

Page 8

www.CasablancaFanCo.com

1.888.227.2178

Remove the pre-installed	Hand tighten the downrod (at	The wires can be cut, but	Tighten the setscrew
setscrew so that the downrod	least 4-5 full turns) until it stops.	leave at least 8” extending	with pliers. DO NOT
can be inserted.		from the top of the downrod.	HAND TIGHTEN.

8”

3/8”

If the setscrew is not tightened securely, the fan may fall.

Image 8

Contents Table of Contents What to Expect with Your Installation Tools Needed Standard Support Mounting Structure CeilingOutlet Box AngledFor angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Ceiling Bracket Installation Preparation Remove the shipping blocks fromDownrod Remove the pre-installed Hand tighten the downrod at Tighten the setscrewSetscrew so that the downrod Leave at least 8 extendingPut the wires and downrod through FanWiring Canopy Insert the two canopy screws Found Hardware bagBlades You kept after removingSwitch Housing Feed the wire plug through the centerLight Kit Socket Shade Socket Ring Socket Ring ToolHardware bag With bulbs of same wattage Insert three 3 switchHousing screws found Maintenance & Cleaning Troubleshooting Fan doesn’t work

Remove the pre-installed