Casablanca Fan Company 54005, 54007, 54006 Light Kit, Socket Shade Socket Ring Socket Ring Tool

Page 14

Light Kit

www.CasablancaFanCo.com

1.888.227.2178

Socket

Shade

Socket Ring

Socket Ring Tool

Remove the socket rings from the sockets.	Connect the plugs from the upper and	Lift the lower switch housing up until the
Install the shades onto the sockets.	lower switch housings. Make sure to line	holes line up with the screw holes in the
Install the socket rings onto the sockets.	up the colored markings on	upper switch housing.
Tighten them by turning clockwise with	the connectors.
the socket ring glass tool.
For questions regarding removing a light kit, call
customer service 1-888-227-2178.
	14

M6004-01 • 08/13/12 • © Casablanca Fan Company

Image 14

Contents Table of Contents What to Expect with Your Installation Tools Needed Outlet Box Standard Support Mounting StructureCeiling AngledFor angled ceilings, point Opening toward peak Ceiling Bracket InstallationMake sure all four 4 bumpers Are still attached Ceiling Bracket Installation Preparation Remove the shipping blocks fromDownrod Setscrew so that the downrod Remove the pre-installed Hand tighten the downrod atTighten the setscrew Leave at least 8 extendingPut the wires and downrod through FanWiring Canopy Insert the two canopy screws Found Hardware bagBlades You kept after removingSwitch Housing Feed the wire plug through the centerLight Kit Socket Shade Socket Ring Socket Ring ToolHardware bag With bulbs of same wattage Insert three 3 switchHousing screws found Maintenance & Cleaning Troubleshooting Fan doesn’t work