Casablanca Fan Company 54007, 54006, 54005 Insert three 3 switch, Housing screws found

Page 15

Light Kit (continued)

www.CasablancaFanCo.com

1.888.227.2178

Insert three (3) switch

Install the CFL bulbs into the

housing screws found in the

sockets. When necessary, replace

 

 

hardware bag.

with bulbs of same wattage.

 

 

 

 

Make sure the lower switch housing is securely attached to the upper switch housing. Failure to properly secure all 3 assembly screws could result in the light fixture falling.

Connect the pull chain pendants

to the short chains coming fromSee next page for fan the switch housing.

operation instructions.

Note: Glass shade style and number of lights may vary.

15

M6004-01 • 08/13/12 • © Casablanca Fan Company

Image 15
Contents Table of Contents What to Expect with Your Installation Tools Needed Angled Standard Support Mounting StructureCeiling Outlet BoxCeiling Bracket Installation Make sure all four 4 bumpers Are still attachedFor angled ceilings, point Opening toward peak Remove the shipping blocks from Ceiling Bracket Installation PreparationDownrod Leave at least 8 extending Remove the pre-installed Hand tighten the downrod atTighten the setscrew Setscrew so that the downrodFan Put the wires and downrod throughWiring Insert the two canopy screws Found Hardware bag CanopyYou kept after removing BladesFeed the wire plug through the center Switch HousingSocket Shade Socket Ring Socket Ring Tool Light KitInsert three 3 switch Housing screws foundHardware bag With bulbs of same wattage Maintenance & Cleaning Fan doesn’t work Troubleshooting