Singer CLASS 99 instruction manual Class 99 & 99K, To Replace the Bobbin

Class 99 & 99K

To Replace the Bobbin

Hold the bobbin between the thumb and forefinger of the left hand, with the thread leading on top from the right toward the left, as shown in

Fig. 18.

Place bobbin into the bobbin case and draw the thread into the slot 1, Fig. 19 in the bobbin case, as shown.

Draw the thread backward between the bobbin case and the tension spring until it reaches the notch 2, Fig. 20, then pull the thread toward the right as shown in Fig. 20.

When closing the slide, place thread up through slot 3, Fig. 21 as shown.

FIG. 18 Replacing the Bobbin

FIG. 19 Threading the Bobbin Case

FIG. 20 Bobbin Case Threaded FIG. 21 Under Threading Completed

Page 17

Table of Contents Previous Page Next Page